ENGLISH OWNER’S MANUAL LCD TV 22LD3*** Please read this manual carefully before operating your set and retain it for future reference. www.lg.
HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.
CONTENTS ACCESSORIES ................................................ III PREPARATION EXTERNAL EQUIPMENT SETUP Antenna Connection............................................ 1 External Equipment Setup ........................................ 2 Supported Display Resolution .............................5 Screen Setup for PC mode ................................6 WATCHING TV / PROGRAMME CONTROL Turning on the TV ............................................. 10 Initializing Setup ............................
CONTENTS SOUND & LANGUAGE CONTROL CONTENTS Auto Volume Leveler ......................................... 56 Clear Voice II ..................................................... 57 Preset Sound Settings-Sound Mode ................ 58 Sound Setting Adjustment -User Mode ............ 59 Infinite Sound .................................................... 59 Balance ............................................................ 60 TV Speakers On/ Off Setup .............................
PREPARATION ACCESSORIES Ensure that the following accessories are included with your TV. If an accessory is missing, please contact the dealer where you purchased the TV. ■ Image shown may differ from your TV. 7 8 LIS T MA R FA K V ME NU MU GU 0 AV MO DE INPU T 5 9 2 6 3 Q.V IE W RA TIO TE P ID E E Q.M OK G A P EN U BA CK IN FO TV RA / D / This item is not included for all models. * Lightly wipe any stains or fingerprints on the surface of the TV with the polishing cloth.
PREPARATION FRONT PANEL CONTROLS NOTE ►TV can be placed in standby mode in order to reduce the power consumption. ► The energy consumed during use can be significantly reduced if the level of brightness of the picture is reduced, and this will reduce the overall running cost. PREPARATION CAUTION ► Do not drag the TV. The floor or the product may be damaged. ■ Image shown may differ from your TV.
USB IN BACK PANEL INFORMATION ■ Image shown may differ from your TV. SERVICE ONLY PREPARATION 11 HDMI / DVI IN VIDEO L/ MONO AUDIO R 1 7 2 3 6 12 AV IN 2 1 5 ANTENNA IN 8 CABLE IN 9 Power Cord Socket This TV operates on an AC power.The voltage is indicated on the Specifications page. (► p. 82) Never attempt to operate the TV on DC power. HDMI/DVI IN Input Connect an HDMI signal to HDMI IN. Or DVI (VIDEO) signal to HDMI/DVI port with DVI to HDMI cable.
PREPARATION STAND INSTALLATION ■ Image shown may differ from your TV 1 PREPARATION Carefully place the TV screen side down on a cushioned surface to protect the screen from damage. NOTE ►Do not use the Cable Holder to lift the TV. - If the TV is dropped, you may be injured or the TV may be damaged. DISCONNECTING THE STAND ASSY 1 Carefully place the TV screen side down on a cushioned surface to protect the screen from damage. 2 Insert stand until sound click.
PREPARATION POSITIONING YOUR TV Tilt Range 12 0 0 3 NOT USING THE DESK-TYPE STAND ■■ Image shown may differ from your TV. When you want to use wall mounting bracket, please take the Protection Cover to attach the set hole as it is. Protection Cover ■ This feature is not available for all models. ■ Image shown may differ from your TV. The TV is equipped with a Kensington Security System connector on the back panel. Connect the Kensington Security System cable as shown below.
PREPARATION CAREFUL INSTALLATION ADVICE PREPARATION ■■ You should purchase necessary components to fix the TV safety and secure to the wall on the market. ■■ Position the TV close to the wall to avoid the possibility of it falling when pushed. ■ The instructions shown below are a safer way to set up the TV, by fixing it to the wall, avoiding the possibility of it falling forwards if pulled. This will prevent the TV from falling forward and causing injury. This will also prevent the TV from damage.
PREPARATION NOTE PREPARATION ►Should ► Install wall mount on a solid wall perpendicular to the floor. ►Should ► use a special wall mount, if you want to install it to ceiling or slanted wall. ►The ► surface that wall mount is to be mounted on should be of sufficient strength to support the weight of TV set; e.g. concrete, natural rock, brick and hollow block. ►Installing ► screw type and length depends on the wall mount used. Further information, refer to the instructions included with the mount.
PREPARATION REMOTE CONTROL KEY FUNCTIONS When using the remote control, aim it at the remote control sensor on the TV. PREPARATION POWER Switches the TV on from standby or off to standby. ENERGY Adjust the Energy Saving mode of the TV.(► p.44) SAVING ENERGY AV MODE AV MODE It helps you select and set images and sounds / INPUT TV/ RAD INPUT External input mode rotate in regular sequence.(► p.29) SAVING 1 2 3 4 5 6 7 8 9 LIST 0 Q.VIEW TV/RAD Selects Radio, TV and DTV channel.
PREPARATION VOLUME UP Adjusts the volume. /DOWN FAV Displays the selected favourite programme. ENERGY AV MODE / INPUT SAVING 1 2 3 4 5 6 7 8 9 LIST 0 Q.VIEW RATIO Selects your desired Aspect Ratio of picture. (► p.41) MUTE Switches the sound on or off. PREPARATION MARK Select the input to apply the Picture Wizard settings. TV/ RAD Programme Selects a programme. UP/DOWN PAGE UP/ Move from one full set of screen information to the DOWN next one.
U H/P HDMI IN 2 EXTERNAL EQUIPMENT SETUP ■ To prevent damage， do not connect to the mains outlet until all connections are made between the devices. Wall Antenna Socket VIDEO L/MONO AUDIO R H/P HDMI IN 2 AV IN 2 VIDEO L/MONO AUDIO R CABLE IN Multi-family Dwellings/Apartments (Connect to wall antenna socket) RF Coaxial Wire (75 ohm) AV IN 2 VIDEO L/MONO AUDIO R AV IN 1 EXTERNAL EQUIPMENT SETUP H/P HDMI IN 2 AV IN 2 USB IN ■ For optimum picture quality, adjust antenna direction.
EXTERNAL EQUIPMENT SETUP External Equipment Setup SERVICE ONLY USB IN ■ To avoid damaging any equipment, you should never plug in any power cord until you have finished connecting all the equipments. ■ Image shown may differ from your TV.
EXTERNAL EQUIPMENT SETUP ► HDMI Audio Supported format : Dolby Digital, PCM DTS Audio format is not supported. Signal Component HDMI 480i/576i 480p/576p 720p/1080i O O O O X O O 1080p O (24Hz/30Hz/50Hz/60Hz) Component Input ports To achieve better picture quality, connect a DVD player to the component input ports as shown below.
U H/P HDMI IN 2 EXTERNAL EQUIPMENT SETUP NOTE USB IN VIDEO L/MONO AUDIO R H/P HDMI IN 2 ► Do not look into the optical output port. Looking at the laser beam may damage your vision. AV IN 2 AV IN 1 4 AV IN 2 VIDEO L/MONO AUDIO R CAUTION VIDEO L/MONO AUDIO R EXTERNAL EQUIPMENT SETUP H/P HDMI IN 2 AV IN 2 USB IN VIDEO L/MONO AUDIO R ► The TV can receive video and audio signals simultaneously when using an HDMI cable.
external equipment setup SUPPORTED DISPLAY RESOLUTION RGB-PC, HDMI/DVI-PC mode HDMI/DVI-DTV mode Horizontal Frequency(kHz) Vertical Frequency(Hz) 720x400 31.468 70.08 640x480 31.469 59.94 800x600 37.879 60.31 1024x768 48.363 60.00 1280x768 47.78 59.87 1360x768 47.72 59.80 Resolution 720x480 720x576 1280x720 1920x1080 Horizontal Frequency(kHz) Vertical Frequency(Hz) 31.469 59.94 31.5 60 31.25 50 37.5 50 44.96/45 59.94/60 33.72/33.75 59.94/60 28.125 50 26.97/27 23.
EXTERNAL EQUIPMENT SETUP SCREEN SETUP FOR PC MODE Screen Reset Returns Position, Size and Phase to the factory default settings. This function works in the following mode : RGB[PC]. EXTERNAL EQUIPMENT SETUP PICTURE Move • Sh Sharpn arpn p ess 70 • Colour 70 • Tint SCREEN OK Prev. Resolution 0 R G • Colour Temp. C50 W C • Advanced Control Auto Config. Position Size ► • Picture Reset Screen •• Screen Move To Set Yes No Phase Reset 1 2 3 4 5 Select PICTURE. Select Screen.
EXTERNAL EQUIPMENT SETUP Auto Configure (RGB [PC] mode only) Automatically adjusts the picture position and minimizes image instability. After adjustment, if the image is still not correct, your TV is functioning properly but needs further adjustment. PICTURE Move • Sh Sharpn arpn p ess 70 • Colour 70 • Tint SCREEN OK Resolution Auto Config. 0 R G • Colour Temp. C50 W C • Advanced Control Position Size ► • Picture Reset Screen •• Screen Prev. Move Auto Config.
EXTERNAL EQUIPMENT SETUP Selecting Resolution To view a normal picture, match the resolution of RGB mode and selection of PC mode. This function works in the following mode: RGB[PC] EXTERNAL EQUIPMENT SETUP PICTURE Move • Sh Sharpn arpn p ess 70 • Colour 70 • Tint SCREEN OK Resolution Auto Config. 0 R G • Colour Temp. C50 W C • Advanced Control Prev. 1024 x 768 1280 x 768 1360 x 768 Size ► • Picture Reset Screen •• Screen Position Move Phase Reset 1 2 3 4 Select PICTURE.
EXTERNAL EQUIPMENT SETUP Adjustment for screen Position, Size, Phase If the picture is not clear after auto adjustment and especially if characters are still trembling, adjust the picture phase manually. This function works in the following mode : RGB[PC]. Move • Sh Sharpn arpn p ess 70 • Colour 70 • Tint SCREEN OK Resolution 0 R G • Colour Temp. C50 W C • Advanced Control 2 3 4 ▲ Auto Config. Position ◄ ► ► Phase Reset 1 Prev.
WATCHING TV / PROGRAMME CONTROL TURNING ON THE TV When your TV is turned on, you will be able to use its features. 1 Firstly, connect the power cord correctly. At this stage, the TV switches to standby mode. 2 In standby mode to turn TV on, press the / I, INPUT or P button on the TV or press the POWER, INPUT, P or NUMBER button on the remote control and the TV will switch on.
WATCHING TV / PROGRAMME CONTROL QUICK MENU Your TV's OSD (On Screen Display) may differ slightly from that shown in this manual. Q.Menu (Quick Menu) is a menu of features which users might use frequently. ◄ Aspect Ratio Sound Mode : It is a feature to automatically set the sound combination which it deems the best for the images being watched. Selects your desired Sound Mode. Audio : Select the sound output. Sleep Timer : Set the sleep timer. Skip Off/On : Select the Skip Off/On.
WATCHING TV / PROGRAMME CONTROL ON SCREEN MENUS SELECTION AND ADJUSTMENT Your TV's OSD (On Screen Display) may differ slightly from that shown in this manual.
WATCHING TV / PROGRAMME CONTROL AUTO PROGRAMME TUNING Use this to automatically find and store all available programmes. When you start auto programming, all previously stored service information will be deleted. The maximum number of programmes that can be stored is 500. But the number may be different which depends on broadcasting signals. SETUP Move ● Auto Tuning Antenna Tuning ● Programme Edit ● Booster Antenna : On Cable Cable Check your TV signal connection.
WATCHING TV / PROGRAMME CONTROL MANUAL PROGRAMME TUNING (IN DIGITAL MODE) Manual Tuning lets you manually add a programme to your programme list. SETUP ● Auto Move SETUP OK Tuning ● Auto WATCHING TV / PROGRAMME CONTROL ● Booster ► ● Programme ◄ Tuning ● Manual Tuning ► ● Manual Tuning Move Edit ● Programme : On Edit ● Booster OK DTV ► UHF CH. 15 Frequency(kHz) 490000 : On ● Signal Strength ● Signal Quality 50% 50% Add Close 1 2 3 Select SETUP.
WATCHING TV / PROGRAMME CONTROL MANUAL PROGRAMME TUNING (IN ANALOGUE MODE) Manual Tuning lets you manually tune and arrange the stations in whatever order you desire. SETUP ● Auto Move SETUP OK Tuning ● Auto ● Programme : On Edit ● Booster : On TV ● Storage ● System I ● System V/UHF ● Channel 0 ● Fine ◄► ● Search ◄► ● Name 2 3 4 5 6 Select SETUP. Select Manual Tuning. 7 8 Select TV or Cable TV. or Select the desired programme number on.
WATCHING TV / PROGRAMME CONTROL SETUP ● Auto Move SETUP OK Tuning ● Auto ● Booster ► ● Programme ► ● Manual Tuning Edit OK ◄ ● Manual Tuning ● Programme : On Move Tuning ● Booster Edit TV ● Storage : On ● System ● Band ● Storage I ● System 0 ● Fine ◄► ● Search ◄► ● Name ◄ 1 V/UHF ● Channel WATCHING TV / PROGRAMME CONTROL 16 ► or C 01 Cable TV ► 1 DK ● Band V/UHF ● Channel 1 ● Fine ◄► ● Search ◄► ● Name C 01 Store Store Close Close ■ Assigning a statio
WATCHING TV / PROGRAMME CONTROL PROGRAMME EDIT When a programme number is skipped, it means that you will be unable to select it using P ton during TV viewing. but- If you wish to select the skipped programme, directly enter the programme number with the NUMBER buttons or select it in the Programme edit menu. This function enables you to skip the stored programmes. You can change the programme number using “Move”function, if “Automatic Numbering” is unchecked when you start Auto Tuning.
WATCHING TV / PROGRAMME CONTROL IN DTV/RADIO MODE ■ Skipping a programme number 1 Select a programme number to be skipped. 2 BLUE Turn the programme number to blue. 3 BLUE Release. • When programmes are to be skipped, the skipped programme shows in blue and these programmes will not be selected by the P buttons during TV viewing. • If you wish to select a skipped programme, directly enter the programme number with the NUMBER buttons or select it in the programme edit or EPG.
WATCHING TV / PROGRAMME CONTROL ■ Selecting favourite programme Favourite programmes are a convenient feature that lets you quickly scan up to programmes of your choice without having to wait for the TV to scan through all the in-between programmes. 1 Select your desired programme. 2 Add corresponding programme to Favourite list of current Favourite group. 3 ■ Selecting favourite programme group 1 2 3 Select your desired programme. Display a pop-up window where Favourite group can be changed.
WATCHING TV / PROGRAMME CONTROL BOOSTER(IN AIR DIGITAL MODE) If reception is poor select Booster to On. When the signal is strong, select "Off". Tuning ● Programme Booster ●●Booster Tuning ● Programme On :: On OK Tuning ● Manual Edit Move ●●Booster Booster Edit Off : :On On On Select SETUP. 2 Select Booster. 3 4 ● Auto Tuning ► ● Manual 1 SETUP OK ► WATCHING TV / PROGRAMME CONTROL ● Auto Move ► SETUP Select On or Off. Save.
WATCHING TV / PROGRAMME CONTROL Software Update Software Update means software can be downloaded through the digital terrestrial broadcasting system. But the actural situation is depending on the broadcasting signals of different area or different broadcasting service. Software Update Picture Test SETUP PICTURE Sound Test AUDIO Signal Test Software Update ◄ On ► ● Current Version 00.00.01 Close TIME Press OK( LOCK ) to set programme settings.
Watching TV / Programme control ■■When setting “Software Update” Occasionally, a transmission of updated digital software information will result in the following menu on the TV screen. ? Software update is available. Would you like to download now? Yes No WATCHING TV / PROGRAMME CONTROL 22 Simple Update : for current update stream Download starts when "Yes" is selected. At this time, progressing pop-up window does not display. Download progress status can be checked from Software Update menu.
WATCHING TV / PROGRAMME CONTROL PICTURE/SOUND TEST This function is a customer support function that can execute picture and sound tests. SETUP PICTURE Software update AUDIO Picture Test Sound Test TIME LOCK Product/Service Info. OPTION Close Press OK( ) to set programme settings. Customer Support 1 2 3 Simple Manual Exit RED Select Customer Support. Select Picture Test or Sound Test. Select Yes or No.
WATCHING TV / PROGRAMME CONTROL SIGNAL TEST This function enables you to view information on the Manufacturer, Model/Type, and Software Version. This displays the information and signal strength of the tuned *MUX. This displays the signal information and service name of the selected MUX. (*MUX: A higher directory of channels in digital broadcasting (a single MUX contains multiple channels.
WATCHING TV / PROGRAMME CONTROL PRODUCT/SERVICE INFORMATION This function is a customer support function that can see product/service information and customer service center information. SETUP PICTURE Software update AUDIO Picture Test Sound Test TIME LOCK OPTION - MODEL/TYPE : - Software version : 00.00.01 - Serial Number : SKY1107 - Used time : 49 - Customer service center : - Homepage : http://www.lg.com Close Press OK( Customer Support 1 2 3 Close ) to set programme settings.
Watching TV / Programme control Simple Manual You can easily and effectively access the TV information by viewing a simple manual on the TV. During the Simple Manual operation, audio will be muted. ■■ Image shown may differ from your TV. WATCHING TV / PROGRAMME CONTROL SETUP PICTURE AUDIO TIME LOCK OPTION Press OK( ) to set programme settings. Customer Support 1 2 Simple Manual Exit GREEN Select Simple Manual. Select the part of the manual you want to see.
WATCHING TV / PROGRAMME CONTROL SELECTING THE PROGRAMME LIST You can check which programmes are stored in the memory by displaying the programme list. Programme List 1 BBC ► Displayed when the Programme is Locked . Exit ► Mini Glossary 2 BBC 3 BBC 4 BBC ■ Displaying programme LIST 1 Display the Programme List. • You may find some blue programmes. These have been set up to be skipped in the programme edit mode.
WATCHING TV / PROGRAMME CONTROL ■ Paging through a programme list 1 Turn the pages. 2 Return to normal TV viewing. Exit Favourite List ◄ ►Favourite Pr. Group ◄ Group B ► ► 1 BBC 2 BBC ► WATCHING TV / PROGRAMME CONTROL ■ Displaying the favourite programme list 3 BBC Pr.Reg. 1 Pr.Edit BLUE Turn the programme edit. YELLOW Current channel is registered/ cancelled as preferred channel on currently selected Group. Display the Favourite Programme List. Favourite group is changed.
WATCHING TV / PROGRAMME CONTROL INPUT LIST By using TV/RAD button, you can move from External Input to RF Input and to the last watched programme in DTV/RADIO/TV mode. Input List Cable AV Component RGB OK HDMI1 HDMI2 Input Label 1 Select the input source. Exit • Antenna : Select it when watching the DTV/TV. • Cable : Select it when watching the Cable TV. • AV : Select it when watching the VCR or external equipment.
WATCHING TV / PROGRAMME CONTROL INPUT LABEL Select a label for each input source. WATCHING TV / PROGRAMME CONTROL Input Label Input List Antenna Move Cable AV Component RGB OK ◄ ► Component ◄ ► RGB ◄ ► HDMI 1 ◄ ► HDMI 2 ◄ ► HDMI1 HDMI2 Input Label AV Exit ▼ Close 1 2 3 BLUE Select Input Label. Select the source. Select the label. • Press the EXIT button to return to normal TV viewing. • Press the BACK button to move to the previous menu screen.
WATCHING TV / PROGRAMME CONTROL SIMPLINK This function operates only with devices with the SIMPLINK logo. Please check the SIMPLINK logo. This TV might not function properly when using it with other products with HDMI-CEC function. This allows you to control and play other AV devices connected to the display through HDMI cable without additional cables and settings. If you do not want SIMPLINK menu,select “Off”.
WATCHING TV / PROGRAMME CONTROL Connecting to Home Theater with the SIMPLINK logo. 1 HDMI / DVI IN 2 1 WATCHING TV / PROGRAMME CONTROL 2 Connect the Digital Audio output terminal on the back of the TV and the Digital Audio input terminal of the Home Theater using optical cables. 3 Select Home Theater in the Speaker menu by pushing the SIMPLINK button.
WATCHING TV / PROGRAMME CONTROL SIMPLINK Functions SIMPLINK Menu Press the 1 2 3 4 5 button and then OK button to select the desired SIMPLINK source. TV viewing : Switch to the previous TV programme regardless of the current mode. DISC playback : Select and play connected discs. When multiple discs are available, the titles of discs are conveniently displayed at the bottom of the screen. VCR playback : Play and control the connected VCR.
WATCHING TV / PROGRAMME CONTROL AV MODE You can select the optimal images and sounds. Off Cinema Sport Game WATCHING TV / PROGRAMME CONTROL 1 AV MODE Disables the AV MODE. Optimizes video and audio for watching movies. Optimizes video and audio for watching sports events. Optimizes video and audio for playing games. Off Cinema Game Sport Press the AV MODE button repeatedly to select the desired source.
WATCHING TV / PROGRAMME CONTROL INITIALIZING(RESET TO ORIGINAL FACTORY SETTINGS) This function initializes all settings. But the settings of Day and Night of the Picture Mode cannot be initialized. It is useful to initialize the product or when you move to other city or country. When the Factory Reset is completed, you must restart the Initializing setup. When the Lock System menu is "On", the message to enter the password appears.
EPG(ELECTRONIC PROGRAMME GUIDE) (IN DIGITAL SIGNAL) This system has an Electronic Programme Guide (EPG) to help your navigation through all the possible viewing options. The EPG supplies information such as programme listings, start and end times for all available services. In addition, detailed information about the programme is often available in the EPG (the availability and amount of these programme details will vary, depending on the particular broadcaster).
EPG (ELECTRONIC PROGRAMME GUIDE) Switch on/off EPG 1 Switch on or off EPG. Select a programme 1 or Select desired programme. 2 The EPG will disappear after moving to a selected program. Button Function in NOW/NEXT Guide Mode You can view a program being broadcasted and one scheduled to follow. Change EPG mode. Programme Guide ▲ That ’70s show Nov. 25, 2008 10:05 1 YLE TV1 25 Nov. 2008 09:45~10:15 YELLOW Enter Manual Timer mode. ALL NOW 1 YLE TV1 2 YLE TV2 BLUE Enter Schedule List mode.
EPG (ELECTRONIC PROGRAMME GUIDE) Button Function in 8 Day Guide Mode Programme Guide ▲ That ’70s show Change EPG mode. ALL 15:00 ▼ Kungskonsumente Antigues Roadshow The Drum Mint Extra TV2: Farmen The Drum You Call The Hits Fashion Essentials ... ... ... Tänään otsikoissa 2 YLE TV2 Enter Date setting mode. 4 TV.. 5 YLE FST 6 CNN YELLOW 8 YLE24 Enter Manual Timer mode. FAV Favourite BLUE Enter Schedule List mode.
EPG (ELECTRONIC PROGRAMME GUIDE) Button Function in Date Change Mode Change to the selected date. Programme Guide ▲ That ’70s show Nov. 25, 2008 10:05 1 YLE TV1 25 Nov. 2008 09:45~10:15 ◄ ALL 4 TV.. 5 YLE FST 6 CNN 8 YLE24 Switch off Date setting mode. 15:00 ▼ 2 YLE TV2 Select a date. Tue. 25 Nov. 14:00 1 YLE TV1 ... ◄ GREEN Switch off Date setting mode. Kungskonsumente Antigues Roadshow The Drum Mint Extra TV2: Farmen The Drum You Call The Hits Fashion Essentials ... ... ...
EPG (ELECTRONIC PROGRAMME GUIDE) Button Function in Remind Setting Mode Sets only a start time for the reminder with the end time grayed out. Manual Timer Switch off Manual Timer mode. Select the date to schedule. Sun. Select Start Time, End time or Programme. Mon. Tue. Wed., Aug. 12 2009 13:46 Wed. Thu. Select 10 the date 11 to remind 12 09 16 17 Time18 Start Fri. 13 End19Time 14 Sat. Wed. 12 Aug. 2009 15 20 21 Programme 22 DTV 27 801 ANTV 28D...
PICTURE CONTROL PICTURE SIZE (ASPECT RATIO) CONTROL You can watch the screen in various picture formats; 16:9, Just Scan, Original, Full Wide, 4:3, 14:9, Zoom and Cinema Zoom. If a fixed image is displayed on the screen for a long time, that fixed image may become imprinted on the screen and remain visible. You can adjust the enlarge proportion using button. This function works in the following signal. 1 2 Select Aspect Ratio. • You can also adjust Aspect Ratio in the PICTURE menu.
PICTURE CONTROL • 4:3 The following selection will allow you to view a picture with an original 4:3 aspect ratio, black bars will appear on both the left and right of the screen. • 14:9 You can view a picture format of 14:9 or a general TV programme in the 14:9 mode. The 14:9 screen is viewed in the same way as in 4:3, but is moved to the up and down. • Zoom The following selection will allow you to view the picture without any alteration, while filling the entire screen.
PICTURE CONTROL PICTURE WIZARD This feature lets you adjust the picture quality of the original image. Use this to calibrate the screen quality by adjusting the Black and White Level etc. General users can calibrate the screen quality by easily following each stage. When you adjust the image to Low, Recommended or High, you can see the changed result as an example. In RGB-PC/HDMI-PC/DVI-PC mode, the changed Colour, Tint and H/V Sharpness values are not applied.
PICTURE CONTROL ENERGY SAVING It reduces the TV’s power consumption. The default factory setting complies with the Energy Star requirements and is adjusted to the comfortable level to be viewed at home. You can increase the brightness of your screen by adjusting the Energy Saving level or by setting the Picture Mode. When adjusting Energy Saving in MHEG mode, the Energy Saving setting is applied after MHEG is finished.
PiCture Control PreSet PiCture SettingS Picture mode-Preset Vivid Standard Cinema Sport game Strengthen the contrast, brightness, colour and sharpness for vivid picture. The most general screen display status. Optimizes video for watching movies. Optimizes video for watching sports events. Optimizes video for playing games.
PiCture Control manual PiCture adjuStment Picture mode-user option Backlight To control the brightness of the screen, adjust the brightness of LCD panel. Adjusting the backlight when setting the brightness of the set is recommended. Contrast Adjusts the signal level between black and white in the picture. You may use Contrast when the bright part of the picture is saturated. Brightness Adjusts the base level of the signal in the picture.
PICTURE CONTROL PICTURE IMPROVEMENT TECHNOLOGY You can calibrate the screen for each Picture Mode or set the video value according to the special video screen. You can set the video value differently for each input. To reset to the factory default screen after making adjustments to each video mode, execute the “Picture Reset” function for each Picture Mode. Image shown may differ from your TV. Move • Br B Briright ighttness ess • Sharpness 70 • Colour 70 • Tint PICTURE OK 50 0 • Colour Temp.
PICTURE CONTROL EXPERT PICTURE CONTROL By segmenting categories, Expert1 and Expert2 provide more categories which users can set as they see fit, offering the optimal picture quality for users. This may also be used to help a professional optimize the TV performance using specific videos. Image shown may differ from your TV.
picture control *This feature is not available for all models. Dynamic Contrast (Off/Low/Medium/High) Dynamic Colour (Off/Low/High ) ■■ Adjusts the contrast to keep it at the best level according to the brightness of the screen. The picture is improved by making bright parts brighter and dark parts darker. ■■ Adjusts screen colours so that they look livelier, richer and clearer. This feature enhances hue, saturation and luminance so that red, blue, green and white look more vivid.
PICTURE CONTROL Colour Gamut (Advanced Control: Wide/Standard) Colour Gamut (Expert Control: EBU/ SMPTE/BT709/Wide) Edge Enhancer (Off/Low/High) PICTURE CONTROL 50 • Standard : Mode to reproduce original colour according to the standard of input signal independent of the display characteristics. • Wide: Mode to use and set the rich colour area of the display. ■ Maximize the utilization for colour area that can be expressed. ■ Displays color domain of signal in Expert Control.
PICTURE CONTROL PICTURE RESET Settings of the selected picture modes return to the default factory settings. PICTURE Move • Br Bri Bright ightness PICTURE OK 50 • Sharpness 70 • Colour 70 R G 0 W C • Tint 3 4 ► • Advanced Control Yes No • Screen Select PICTURE. PICTURE CONTROL 2 70 •• Picture Picture Reset Reset ► 1 • Sharpness OK • Colour Temp. C50 • Advanced Control • Screen 50 • Colour? All picture 70 Rsetting willGbe reset. C • Tint 0 W Continue? • Colour Temp.
PICTURE CONTROL POWER INDICATOR It helps you adjust the brightness of moving LED when power is turned on. Standby Light Determines whether to set the indicator light on the front of the TV to On or Off in standby mode. Power Light Determines whether to set the indicator light on the front of the TV to On or Off when the power turns on.
PICTURE CONTROL MHEG GUIDE This menu determines whether to show the UI guide or the guide provided by MHEG when a user hits the 'GUIDE' key. If you set the 'MHEG Guide' menu to On, the 'Digital Teletext' sent by broadcasters will be used. Note that 'Digital Teletext' is not always present.
PICTURE CONTROL MODE SETTING We recommend setting the TV to “Home Use ” mode for the best picture in your home environment. “Store Demo ” mode is an optimal setting for displaying at stores.
PICTURE CONTROL DEMO MODE Display the slide show to explain the various logo of this TV. It is not possible to use Demo Mode in Home Use mode. In Store Demo, Demo Mode is automatically set to On. Once Demo Mode is set to Off in Store Demo, Demo Mode does not run and only the screen is reset. The screen is reset automatically after 5 minutes in Demo Mode.
SOUND & LANGUAGE CONTROL AUTO VOLUME LEVELER AVL automatically remains on the same level of volume if you change programmes. Because each broadcasting station has its own signal conditions, volume adjustment may be needed every time when the channel is changed. This feature allows users to enjoy stable volume levels by making automatic adjustments for each program.
SOUND & LANGUAGE CONTROL CLEAR VOICE II By differentiating the human sound range from others, it helps users listen to human voices better.
SOUND & LANGUAGE CONTROL PRESET SOUND SETTINGS-SOUND MODE You can select your preferred sound setting; Standard, Music, Cinema, Sport or Game and you can also adjust the Treble, Bass. Sound Mode lets you enjoy the best sound without any Special adjustment as the TV sets the appropriate sound options based on the programme content. Standard, Music, Cinema, Sport and Game are preset for optimum sound quality at the factory. Standard Music Cinema Sport Game Offers standard-quality sound.
SOUND & LANGUAGE CONTROL SOUND SETTING ADJUSTMENT -USER MODE AUDIO Move Volume ● Clear Voice II : Off ● Auto 3 0 L R Sound Mode Mode ●●Sound ► Standard(User) :: Standard 3 4 5 OK : Off 3 L R Standard(User) 0 Standard Standard(User) :: Standard Music • Treble 50 • Infinite Sound : OffCinema • Treble 50 Sport • Bass 50 • Bass • Re R sett 2 Voice II Move : Off ● Balance • Infinite Sound : Off 1 Volume ● Clear ● Balance Sound Mode Mode ●●Sound AUDIO OK : Off ► ● Auto 5
SOUND & LANGUAGE CONTROL BALANCE You can adjust the sound balance of the speakers to preferred levels.
SOUND & LANGUAGE CONTROL TV SPEAKERS ON/ OFF SETUP You can adjust the TV internal speaker status. In AV, COMPONENT, RGB and HDMI1/2/3 with HDMI to DVI cable, the TV speaker can be operational even when there is no video signal. If you wish to use an external Hi-Fi system, turn off the TV’s internal speakers.
SOUND & LANGUAGE CONTROL DTV AUDIO SETTING (IN DIGITAL MODE ONLY) When different audio types exist in an input signal, this function allows you to select the audio type you want.
SOUND & LANGUAGE CONTROL SELECTING DIGITAL AUDIO OUT This function allows you to select your preferred Digital Audio Output. The TV can only output DOLBY Digital if a channel is broadcast with Dolby Digital audio. When Dolby digital is available, selecting Auto in the Digital Audio Out menu will set SPDIF(Sony Philips Digital InterFace) output to Dolby Digital. If Auto is selected in the digital audio out menu when dolby digital is not available, SPDIF output will be PCM(Pulse-code modulation).
SOUND & LANGUAGE CONTROL AUDIO RESET Settings of the selected Sound Mode return to the default factory settings.
SOUND & LANGUAGE CONTROL STEREO/DUAL RECEPTION (IN ANALOGUE MODE ONLY) When a programme is selected, the sound information for the station appears with the programme number and station name. 1 Select Audio. 2 Select the sound output. Broadcast On Screen Display Mono MONO Stereo STEREO Dual DUAL I, DUAL II, DUAL I+II ■ Mono sound selection If the stereo signal is weak in stereo reception, you can switch to mono. In mono reception, the clarity of sound is improved.
SOUND & LANGUAGE CONTROL NICAM RECEPTION (IN ANALOGUE MODE ONLY) If the TV is equipped with a receiver for NICAM reception, high quality NICAM (Near Instantaneous Companding Audio Multiplex) digital sound can be received. Sound output can be selected according to the type of broadcast received. 1 SOUND & LANGUAGE CONTROL 66 When NICAM mono is received, you can select NICAM MONO or FM MONO. 2 When NICAM stereo is received, you can select NICAM STEREO or FM MONO.
SOUND & LANGUAGE CONTROL ON-SCREEN MENU LANGUAGE/COUNTRY/AREA SELECTION The installation guide menu appears on the TV screen when it is switched on for the first time. 1 Select your country. * If you want to change Language/Area or Country selection 1 2 Select Language(Language). 3 4 Select Menu Language. Select your desired language. Select OPTION. 2 Select Country/Area. 3 4 Select your country. Save. Save. • Press the MENU/EXIT button to return to normal TV viewing.
SOUND & LANGUAGE CONTROL LANGUAGE SELECTION (IN DIGITAL MODE ONLY) The Audio function allows selection of a preferred language. If audio data in a selected language is not broadcast, the default language audio will be played. Use the Subtitle function when two or more subtitle languages are broadcast. If subtitle data in a selected language is not broadcast, the default language subtitle will be displayed.
SOUND & LANGUAGE CONTROL Audio Language OSD Information < Audio Language Selection > ► When two or more audio languages are broadcast, you can select the audio language. Display N.A Status Not Available MPEG Audio l Dolby Digital Audio Audio for “Visual Impaired” 1 2 Audio for “Hearing Impaired” Dolby Digital Plus Audio Select Audio. Select an audio language.
TIME SETTING CLOCK SETUP The clock is set automatically after a digital signal is received.(You can set the clock manually only if the TV has no DTV signal.) You must set the time correctly before using on/off timer function. TIME Move TIME OK Move ● Clock ► ● Clock ◄ OK Auto ► ● Off Time : Off ● Off Time : Off Year 2008 ● On Time : Off ● On Time : Off Month Mar.
TIME SETTING AUTO ON/OFF TIME SETTING The Off time function automatically switches the TV to standby at a preset time. Two hours after the TV is switched on by the on time function it will automatically switch back to standby mode unless a button has been pressed. The Off time function overrides the On time function if both are set to the same time. The TV must be in standby mode for the On time to work.
TIME SETTING SLEEP TIMER SETTING You do not have to remember to switch the TV off before you go to sleep. The sleep timer automatically switches the TV to standby after the preset time has elapsed. 1 2 Select Sleep Timer. Select Off, 10, 20, 30, 60, 90, 120, 180 or 240 min.. • When you switch the TV off, the preset sleep timer is cancelled. • You can also adjust Sleep Timer in the TIME menu.
PARENTAL CONTROL / RATINGS SET PASSWORD & LOCK SYSTEM Enter the password, press ‘0’, ‘0’, ‘0’, ‘0’ on the remote control handset. If a channel is locked, enter the password to unlock it temporarily. LOCK 4 5 ● Set : :Off Off Move ● Lock System Off Off : :Off Off ● Block Programme ● Block Programme ● Input Block ● Input Block : Off ● Key Select LOCK. OK Password Lock On : Off • If you forget your password, press ‘0’, ‘3’, ‘2’, ‘5’ on the remote control handset. Select Lock System.
PARENTAL CONTROL / RATINGS BLOCK PROGRAMME Blocks any programme that you do not want to watch or that you do not want your children to watch. It is available to use this function when Lock System ”On”. Enter a password to watch a blocked programme.
PARENTAL CONTROL / RATINGS EXTERNAL INPUT BLOCKING Enables you to block an input. It is available to use this function when Lock System ”On”. LOCK ● Set LOCK OK ● Set Password ● Lock ● Key Move System Lock Password ● Lock : On ● Block Programme ● Input Block Move System ● AV : On ● Block Progra ● Input Block ▲ ▼ ● Key : Off Lock : Off OK ◄ ● Component Off ● RGB Off ● HDMI1 Off ● HDMI2 ► Off ▲ ▼ Off Close 1 Select LOCK. 2 Select Lock System.
PARENTAL CONTROL / RATINGS KEY LOCK The TV can be set so that the remote control is required. This feature can be used to prevent unauthorized viewing. LOCK Move OK Password ● Lock System ●● Key Key Lock Lock LOCK ● Set : Off Move ● Lock System : Off Programme ● Block Programme ● Input Block ● Input Block : Off : Off OK Password ● Block ► ● Set ● Key Lock : :Off Off Off Off On 1 Select LOCK. 2 Select Key Lock. 3 PARENTAL CONTROL / RATINGS 76 4 Select On or Off.
DIGITAL TELETEXT The TV gives you access to digital teletext which is greatly improved in various aspects such as text, graphics etc. This digital teletext can access special digital teletext services and specific services which broadcast digital teletext. You should select off in the subtitle language menu to display teletext by pressing the SUBTITLE button. Image shown may differ from your TV.
DIGITAL TELETEXT TELETEXT IN DIGITAL SERVICE 1 Press the numeric or P 2 Press the GUIDE , TEXT or coloured button to switch on teletext. 3 Follow the indications on digital teletext and move onto the next step by pressing OK , RED , GREEN, YELLOW, BLUE or NUMBER buttons and so on. 4 Press the GUIDE ,TEXTor colour button to switch off digital teletext and return to TV viewing. button to select a certain service which broadcasts digital teletext.
APPENDIX TROUBLESHOOTING The TV does not operate properly. The remote control does not work Power is suddenly turned off A A A A Check to see if there is any object between the TV and the remote control causing an obstruction. Ensure you are pointing the remote control directly at the TV. Ensure that the batteries are installed with correct polarity (+ to +, - to -). Install new batteries. Is the sleep timer set? Check the power control settings. Has the Power supply been interrupted.
APPENDIX The audio function does not work. A Picture OK & No sound A A A No output from one of the speakers Unusual sound from inside the TV No sound when connecting HDMI A A A + or - button. Press the Sound muted? Press MUTE button. Try another channel. The problem may be with the broadcast. Are the audio cables installed properly? Adjust Balance in menu option.
APPENDIX MAINTENANCE Early malfunctions can be prevented. Careful and regular cleaning can prolong the life of your new TV. Caution: Be sure to switch the power off and unplug the power cord before you begin any cleaning.
APPENDIX PRODUCT SPECIFICATIO NS MODELS Dimensions (Width x Height x Depth) Weight 22LD3*** 22LD350-CB with stand 526 x 377 x 165 mm 20.71x 14.84 x 6.49 inches without stand 526 x 331 x 65mm 20.71x 13.03x 2.54 inches with stand without stand 4.3 kg / 9.55 lbs 4.0 kg / 8.
APPENDIX Open source software notice The following GPL executables and LGPL/MPL libraries used in this product are subject to the GPL2.0/LGPL2.1/MPL1.1 License Agreements: GPL EXECUTABLES: • Linux kernel 2.6 • busybox • lzo LGPL LIBRARIES: • uClibc MPL LIBRARIES: • Nanox LG Electronics offers to provide source code to you on CD-ROM for a charge covering the cost of performing such distribution, such as the cost of media, shipping and handling upon e-mail request to LG Electronics at: opensource@lge.
Record the model number and serial number of the TV. Refer to the label on the back cover and quote this information to your dealer when requiring any service. Model : Serial No.
