OWNER’S MANUAL LCD TV Please read this manual carefully before operating your set and retain it for future reference. www.lg.
HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.
ACCESSORIES ■ Image shown may differ from your TV. Owner's Manual ACCESSORIES Ensure that the following accessories are included with your TV. If an accessory is missing, please contact the dealer where you purchased the product. RA TIO Owner’s manual Owner’s Manual Batteries Remote Control Power Cord *Lightly wipe any stains or fingerprints on the surface of the TV with the polishing cloth. Polishing Cloth Polishing cloth for use on the screen This feature is not available for all models.
CONTENTS A C C E S S O R I E S .....................................................1 CONTENTS PREPARATION Front Panel Controls................................................... 4 Back Panel Information .............................................. 5 Stand Installation..........................................................6 Back Cover for Wire Arrangement........................... 7 Attaching the TV to a desk ........................................8 Positioning your display..........................
SOUND & LANGUAGE CONTROL Troubleshooting ............................................................55 Maintenance .................................................................57 Product Specifications ................................................58 IR Codes ....................................................................... 59 CONTENTS Preset Sound Settings - Sound Mode ....................41 Sound Setting Adjustment - User Mode ...............42 Auto Volume Leveler .........................
PREPARATION FRONT PANEL CONTROLS ■ This is a simplified representation of the front panel. Image shown may differ from your TV. PREPARATION 19/22/26/32LD310 (Only 19/22/26LD310) POWER INPUT MENU OK INPUT MENU OK VOLUME PROGRAMME P (Only 32LD310) P PROGRAMME VOLUME Remote Control Sensor OK OK MENU MENU INPUT INPUT POWER Power/Standby Indicator Illuminates red in standby mode. Illuminates blue when the TV is switched on.
BACK PANEL INFORMATION A Image shown may differ from your TV. PREPARATION 1 4 3 2 AUDIO OUT AV IN VIDEO L(MONO) AUDIO R IN AUDIO COMPONENT IN VIDEO ANTENNA IN SERVICE ONLY 5 1 2 Power Cord Socket This TV operates on an AC power. The voltage is indicated on the Specifications page. Never attempt to operate the TV on DC power. HDMI Input Connect a HDMI signal to HDMI IN. This TV does not support DVI(VIDEO) signal using DVI to HDMI cable.
PREPARATION STAND INSTALLATION ■ Image shown may differ from your TV When assembling the desk type stand, check whether the bolt is fully tightened. (If not tightened fully, the product can tilt forward after the product installation.) If you tighten the bolt with excessive force, the bolt can deviate from abrasion of the tightening part of the bolt. PREPARATION Only 26/32LD310 Only 19/22LD310 1 2 Carefully place the TV screen side down on a cushioned surface to protect the screen from damage.
BACK COVER FOR WIRE ARRANGEMENT ■ Image shown may differ from your TV. Only 26/32LD310 Only 19/22LD310 2 Connect the cables as necessary. To connect additional equipment, see the External Equipment Setup section of the manual. Install the C A B L E M A N A G E M E N T C L I P as shown. 1 Connect the cables as necessary. 2 Open the C A B L E M A N A G E M E N T C L I P as shown and manage the cables. To connect additional equipment, see the External Equipment Setup section of the manual.
PREPARATION ATTACHING THE TV TO A DESK POSITIONING YOUR DISPLAY (Only 26/32LD310) (Only 19/22LD310) PREPARATION ■ Image shown may differ from your TV. The TV must be attached to desk so it cannot be pulled in a forward/backward direction, potentially causing injury or damaging the product. Use only an attached screw. ■ Image shown may differ from your TV. Adjust the position of the panel in various ways for maximum comfort.
NOT USING THE DESK-TYPE STAND ■ Image shown may differ from your TV. When installing the wall-mounted unit, use the protection cover. Only 19/22LD310 Carefully place the TV screen side down on a cushioned surface to protect the screen from damage. 2 Loose the bolts from TV. 3 4 1 Carefully place the TV screen side down on a cushioned surface to protect the screen from damage. 2 Loose the bolts from TV. 3 Detach the stand from TV.
PREPARATION KENSINGTON SECURITY SYSTEM This feature is not available for all models. CAREFUL INSTALLATION ADVICE ■ ■ Image shown may differ from your TV. PREPARATION The TV is equipped with a Kensington Security System connector on the back panel. Connect the Kensington Security System cable as shown below. For the detailed installation and use of the Kensington Security System, refer to the user’s guide provided with the Kensington Security System. For further information, contact http://www.
A A The TV can be installed in various ways such as on a wall, or on a desktop etc. The TV is designed to be mounted horizontally. We recommend the use of a LG Brand wall mounting bracket when mounting the TV to a wall. A We recommend that you purchase a wall mounting bracket which supports VESA standard. A LG recommends that wall mounting be performed by a qualified professional installer. A EARTHING Should Install wall mount on a solid wall perpendicular to the floor.
PREPARATION To prevent damage do not connect to the mains outlet until all connections are made between the devices. ■ ANTENNA CONNECTION For optimum picture quality, adjust antenna direction. An antenna cable and converter are not supplied.
EXTERNAL EQUIPMENT SETUP ■ ■ To avoid damaging any equipment, never plug in any power cords until you have finished connecting all equipment. Image shown may differ from your TV. HD RECEIVER SETUP Connecting with a component cable 1 AUDIO OUT AV IN VIDEO L(MONO) AUDIO R IN Connect the audio output of the digital set-top box to the C O M P O N E N T I N A U D I O jacks on the TV. 3 Turn on the digital set-top box. (Refer to the owner’s manual for the digital set-top box.
COMPONENT IN EXTERNAL EQUIPMENT SETUP Connecting a set-top box with a HDMI cable 1 Connect the HDMI output of the digital set-top box to the H D M I I N jack on the TV. AV IN VIDEO L(MONO) AUDIO R 2 Select H D M I input source using the I N P U T button on the remote control. 3 Turn on the digital set-top box. (Refer to the owner’s manual for the digital set-top box.) G G G G TV can receive the video and audio signal simultaneously with using a HDMI cable.
DVD SETUP Connecting with a component cable 1 Connect the video outputs (Y, PB, PR) of the DVD to the C O M P O N E N T I N V I D E O jacks on the TV. AUDIO OUT AV IN VIDEO L(MONO) AUDIO R VIDEO AUDIO SERVICE ONLY 3 Turn on the DVD player, insert a DVD. 4 Select C o m p o n e n t input source using the I N P U T button on the remote control. 5 Refer to the DVD player's manual for operating instructions.
EXTERNAL EQUIPMENT SETUP COMPONENT IN Connecting with a HDMI cable 1 Connect the HDMI output of the DVD to the H D M I I N jack on the TV. AV IN VIDEO L(MONO) AUDIO R 2 3 Select H D M I input source using the I N P U T button on the remote control. Refer to the DVD player's manual for operating instructions. ! NOTE The TV can receive video and audio signals simultaneously when using a HDMI cable.
VCR SETUP ■ To avoid picture noise (interference), allow adequate distance between the VCR and TV. Connecting with a RF cable Connect the antenna cable to the A N T I N socket of the VCR. DIO IO R COMPONENT IN 2 Connect the A N T O U T socket of the VCR to the A N T E N N A I N socket on the TV. ANT OUT S-VIDEO ANT IN OUTPUT SWITCH L VIDEO R 1 ANTENNA IN Wall Jack 3 2 Press the P L A Y button on the VCR and match the appropriate programme between the TV and VCR for viewing.
EXTERNAL EQUIPMENT SETUP OTHER A/V SOURCE SETUP 1 AUDIO OUT AV IN VIDEO L(MONO) AUDIO R IN COMPONENT IN EXTERNAL EQUIPMENT SETUP V I D E O jacks between TV Connect the A U D I O/V and external equipment. Match the jack colours. (Video = yellow, Audio Left = white, and Audio Right = red) AUDIO VIDEO ANTENNA IN SERVICE ONLY 2 3 Select A V input source using the I N P U T button on the remote control. If connected to A V I N, select A V input source.
Supported Display Resolution HDMI-DTV mode Resolution 720x480 Vertical Frequency(Hz) 59.94 60.00 720x576 31.25 50.00 1280x720 44.96 45 37.50 59.94 60.00 50.00 ! NOTE G G G EXTERNAL EQUIPMENT SETUP Horizontal Frequency(kHz) 31.47 31.5 HDMI mode supports PCM audio format only. If the Audio setting is set to Dolby/DTS/Bitstream in some DVDP/STB, make sure to change the setting to PCM. If the resolution of external equipment is over 1280x720p, there will be no picture on the TV.
WATCHING TV / PROGRAMME CONTROL REMOTE CONTROL KEY FUNCTIONS When using the remote control, aim it at the remote control sensor on the TV. POWER Switches the set on from standby or off to standby. TV Returns to the TV viewing from any mode. INPUT If you press the button once, the input source OSD will appear on screen as shown. Press the D / E button and then OK button to select the desired input source. WATCHING TV / PROGRAMME CONTROL 20 MUTE Switches the sound on or off.
THUMBSTICK Allows you to navigate the on-screen menus and adjust (Up/Down/Left/ the system settings to your preference. Right) Adjusts the volume. Selects a programme. OK Accepts your selection or displays the current mode. SLEEP Sets the sleep timer. RATIO Selects your desired picture format.(G p . 3 3) Coloured These buttons are used for teletext (on T E L E T E X T buttons models only) or P r o g r a m m e e d i t. TELETEXT These buttons are used for teletext.
WATCHING TV / PROGRAMME CONTROL TURNING ON THE TV When your TV is turned on, you will be able to use its features. 1 Firstly, connect the power cord correctly. At this stage, the TV switches to standby mode. ■ In standby mode to turn TV on, press the button on the TV or press the P O W E R buttons on the remote control and the TV will switch on.
ON SCREEN MENUS SELECTION AND ADJUSTMENT Your TV's OSD (On Screen Display) may differ slightly from that shown in this manual. 1 Press the M E N U button and then D / 2 Press the G button and then D / 3 Change the setting of an item in the sub or pull-down menu with F / You can move to a higher level menu by pressing the O K button. Auto Tuning Manual Tuning Programme Edit Favourite Programme DEF G OK MENU Setup MENU button to display each menu. button to select a menu item. G button.
WATCHING TV / PROGRAMME CONTROL AUTO PROGRAMME TUNING Up to 200 TV stations can be stored by programme numbers (0 to 199). Once you have preset the stations, you will be able to use the D / E or NUMBER buttons to scan the stations you have programmed. Stations can be tuned using automatic or manual modes. All stations which can be received are stored by this method. It is recommended that you use Auto tuning during installation of this TV.
MANUAL PROGRAMME TUNING Manual Turning lets you manually tune and arrange the stations in whatever order you desire. 1 Press the M E N U button and then D / the S e t u p menu. 2 Press the G button and then D / M a n u a l T u n i n g. 3 Press the G button and then D / 4 Press the F / G button or NUMBER buttons to select the desired programme number (0 to 199). 5 Press the D / 6 Press the G button and then D / E button to select a TV system menu; BG: PAL B/G, SECAM B/G (Asia / NewZealand / M.
WATCHING TV / PROGRAMME CONTROL FINE TUNING Normally fine tuning is only necessary if reception is poor. WATCHING TV / PROGRAMME CONTROL Setup 1 Press the M E N U button and then D / the S e t u p menu. 2 Press the G button and then D / M a n u a l T u n i n g. E E Auto Tuning Manual Tuning Programme Edit Favourite Programme button to select button to select DEF G OK MENU 1 3 4 Press the G button and then D / Press the G button and then F / the best picture and sound.
ASSIGNING A STATION NAME You can assign a station name up to five characters to each programme number. 2 Press the G button and then D / M a n u a l T u n i n g. E E Setup button to select Auto Tuning Manual Tuning Programme Edit Favourite Programme button to select DEF G OK MENU 1 3 4 Press the G button and then D / N a m e. E button to select WATCHING TV / PROGRAMME CONTROL 1 Press the M E N U button and then D / the S e t u p menu.
WATCHING TV / PROGRAMME CONTROL PROGRAMME EDIT This function enables you to delete or skip stored programmes. Also you can move some stations to other programme numbers. WATCHING TV / PROGRAMME CONTROL 1 Press the M E N U button and then D / the S e t u p menu. 2 Press the G button and then D / P r o g r a m m e E d i t. 3 Press the G button to display the Programme edit menu. E E button to select button to select Deleting a programme 1.
FAVOURITE PROGRAMME This function lets you select your favourite programmes directly. Repeatedly press the YELLOW button to select stored favourite programmes. Press the M E N U button and then D / S e t u p menu. 2 Press the G button and then D / F a v o u r i t e P r o g r a m m e. 3 Press the 4 Press the D / G E E WATCHING TV / PROGRAMME CONTROL 1 button to select the Setup Auto Tuning Manual Tuning Programme Edit Favourite Programme button to select button.
WATCHING TV / PROGRAMME CONTROL SELECTING THE PROGRAMME LIST You can check which programmes are stored in the memory by displaying the programme list. A Displaying programme list Press the L I S T button to display the P r o g r a m m e L i s t menu. WATCHING TV / PROGRAMME CONTROL The programme list appears on the screen. One programme list contains ten programmes as shown. ! NOTE a. You may find some blue programmes.
KEY LOCK The TV can be set so that the remote control is needed to control it. This feature can be used to prevent unauthorized viewing. This TV is programmed to remember which option it was last set to even if you turn the TV off. 1 Press the M E N U button and then D / the O p t i o n menu. 2 Press the G button and then D / L o c k. E E button to select Language Key Lock Power Indicator Factory Reset button to select K e y DEF G OK MENU 1 Press the G button and then D / O f f.
WATCHING TV / PROGRAMME CONTROL FACTORY RESET Use to quickly reset all the menu options to their original factory preset values. This function deletes all TV programmes. When the F a c t o r y R e s e t is completed, you must restart the I n s t a l l a t i o n G u i d e. WATCHING TV / PROGRAMME CONTROL Option 1 Press the M E N U button and then D / select the O p t i o n menu. 2 Press the G button and then D / F a c t o r y R e s e t.
PICTURE CONTROL PICTURE SIZE (ASPECT RATIO)CONTROL You can watch the screen in various picture formats; 1 6 : 9 , O r i g i n a l, 4 : 3, 1 4 : 9, Z o o m 1, Z o o m 2 and J u s t S c a n. If a fixed image is displayed on the screen for a long time, that fixed image may become imprinted on the screen and remain visible. You can adjust the enlarge proportion using D E button. This function works in the following signal. 1 You can adjust Aspect Ratio in the Picture menu.
PICTURE CONTROL PRESET PICTURE SETTINGS Picture Mode-Preset Picture Mode adjusts the TV for the best picture appearance. Select the preset value in the P i c t u r e M o d e menu based on the programme category. V i v i d, S t a n d a r d and C i n e m a are programmed for optimum picture reproduction at the factory and cannot be changed. PICTURE CONTROL Picture 1 2 Press the M E N U button and then D / the P i c t u r e menu. Press the G button and then D / P i c t u r e M o d e.
MANUAL PICTURE ADJUSTMENT Picture Mode-User Option Backlight Contrast Brightness Sharpness 1 2 Press the M E N U button and then D / the P i c t u r e menu. Press the G button and then D / P i c t u r e M o d e. E E Picture Aspect Ratio Picture Mode • Backlight • Contrast • Brightness • Sharpness • Colour • Tint button to select E PICTURE CONTROL Colour Tint To control the brightness of the screen, adjust the brightness of LCD panel.
PICTURE CONTROL PICTURE IMPROVEMENT TECHNOLOGY You can calibrate the screen for each Picture Mode or set the video value according to the special video screen. You can set the video value differently for each input. To reset to the factory default screen after making adjustments to each video mode, execute the “Picture Reset” function for each Picture Mode. E PICTURE CONTROL Picture 1 Press the MENU button and then D / the P i c t u r e menu. 2 Press the G button and then D / A d v a n c e d.
■ Adjusts the contrast to keep it at the best level according to the brightness of the screen. The picture is improved by making bright parts brighter and dark parts darker. Dynamic Colour (Off/Low/High) ■ Adjusts screen colours so that they look livelier, richer and clearer. This feature enhances hue, saturation and luminance so that red, blue, green and white look more vivid. Noise Reduction (Off/Low/High) ■ Reduces screen noise without compromising video quality.
PICTURE CONTROL PICTURE RESET Settings of the selected picture modes return to the default factory settings. Picture E 1 Press the M E N U button and then D / the P i c t u r e menu. E • Backlight • Contrast • Brightness • Sharpness • Colour • Tint • Advanced • Picture Reset button to select 100 100 50 70 70 0 E 2 Press the G button and then D / P i c t u r e R e s e t. E DEF G OK MENU button to select 1 Picture E PICTURE CONTROL 3 Press the G button to initialize the adjusted value.
SCREEN SETUP Manual Configure (Adjustment for screen Position) If the picture is not clear and especially if characters are still trembling, adjust the picture phase manually. This function works in the following mode when the signal exist : HDMI, Component PICTURE CONTROL Picture 1 Aspect Ratio Picture Mode • Backlight • Contrast • Brightness • Sharpness • Colour • Tint Press the M E N U button and then use D / E button to select the P i c t u r e menu.
PICTURE CONTROL Initializing (Reset to original factory settings) This function operates in current mode. To initialize the adjusted value This function works in the following mode when the signal exist : HDMI, Component PICTURE CONTROL Picture 1 2 Aspect Ratio Picture Mode • Backlight • Contrast • Brightness • Sharpness • Colour • Tint Press the MENU button and then use D / E button to select the P i c t u r e menu. Press the G button and then use D / E button to select S c r e e n.
SOUND & LANGUAGE CONTROL PRESET SOUND SETTINGS-SOUND MODE You can select your preferred sound setting; Standard, Music or Cinema. Sound Mode lets you enjoy the best sound without any Special adjustment as the TV sets the appropriate sound options based on the programme content. S t a n d a r d, M u s i c and C i n e m a are preset for optimum sound quality at the factory and are not adjustable. 1 Press the M E N U button and then D / the A u d i o menu.
SOUND SETTING ADJUSTMENT -USER MODE Audio SOUND & LANGUAGE CONTROL 1 Press the M E N U button and then D / the A u d i o menu. 2 Press the G button and then D / S o u n d M o d e. E E button to select Sound Mode • Treble • Bass • Reset Auto Volume Balance 50 50 0 button to select DEF G OK MENU 1 3 4 Press the G button and then D / S t a n d a r d, M u s i c or C i n e m a . E Press the O K button and then D / T r e b l e or B a s s.
AUTO VOLUME LEVELER Auto Volume automatically remains on the same level of volume if you change programmes. 1 2 Press the M E N U button and then D / the A u d i o menu. Press the G button and then D / V o l u m e. E E button to select Sound Mode • Treble • Bass • Reset Auto Volume Balance 50 50 0 button to select A u t o DEF G OK MENU 1 3 4 Press the G button and then D / or O f f. E button to select O n Press the M E N U button to move to the previous menu screen.
SOUND & LANGUAGE CONTROL BALANCE You can adjust the sound balance of the speakers to the preferred levels. SOUND & LANGUAGE CONTROL Audio 1 Press the M E N U button and then D / the A u d i o menu. 2 Press the G button and then D / B a l a n c e. E E button to select Sound Mode • Treble • Bass • Reset Auto Volume Balance 50 50 0 button to select DEF G OK MENU 1 3 4 Press the G button and then F / desired adjustment.
AUDIO RESET Settings of the selected Sound Mode return to the default factory settings. 1 Press the M E N U button and then D / the A u d i o menu. 2 Press the G button and then D / R e s e t. E E button to select Sound Mode • Treble • Bass • Reset Auto Volume Balance 50 50 0 button to select DEF G OK MENU 1 3 4 Press the G button and then O K button Press the M E N U button to move to the previous menu screen.
SOUND & LANGUAGE CONTROL I/II Stereo/Dual Reception When a programme is selected, the sound information for the station appears with the programme number and station name. 1 Press the I / I I button to select the M u l t i A u d i o menu. SOUND & LANGUAGE CONTROL Broadcast Mono MONO Stereo STEREO Dual DUAL I, DUAL II, DUAL I+II A Mono sound selection If the stereo signal is weak in stereo reception, you can switch to mono. In mono reception, the clarity of sound is improved.
NICAM Reception If the TV is equipped with a receiver for NICAM reception, high quality NICAM (Near Instantaneous Companding Audio Multiplex) digital sound can be received. Sound output can be selected according to the type of broadcast received. When NICAM mono is received, you can select N I C A M M O N O or F M M O N O. 2 When NICAM stereo is received, you can select N I C A M S T E R E O or F M M O N O. If the stereo signal is weak, switch to F M M O N O.
SOUND & LANGUAGE CONTROL ON-SCREEN MENU LANGUAGE SELECTION The menus can be shown on the screen in the selected language. SOUND & LANGUAGE CONTROL 48 1 Press the M E N U button and then use D / O p t i o n menu. 2 Press the G button and then use D / E button to select L a n g u a g e. 3 Press the G button and then use D / desired language. E / 4 Press the O K button 5 Press the M E N U button to move to the previous menu screen.
TIME SETTING CLOCK SETUP You must set the time correctly before using on/off time function. If current time setting is erased by a power failure or the TV is unplugged, reset the clock. Time Press the M E N U button and then D / the T i m e menu. 2 Press the G button and then D / C l o c k. E E button to select Clock Off Time On Time Sleep Timer button to select DEF G OK MENU 1 3 Press the G button and then D / 4 Press the G button and then D / minute. E button to set the hour.
TIME SETTING AUTO ON/OFF TIMER SETTING The Off time function automatically switches the TV to standby at a preset time. Two hours after the TV is switched on by the on time function it will automatically switch back to standby mode unless a button has been pressed. Once the on time/off time is set, these functions operate daily at the preset time. The Off time function overrides the On time function if both are set to the same time. The TV must be in standby mode for the On time to work.
SLEEP TIMER SETTING You do not have to remember to switch the TV off before you go to sleep. The sleep timer automatically switches the TV to standby after the preset time has elapsed. Time Press the M E N U button and then D / the T i m e menu. 2 Press the G button and then D / T i m e r. E E Clock Off Time On Time Sleep Timer button to select button to select S l e e p DEF G OK MENU 1 Press the G button and then D / E button to set the O f f, 1 0, 2 0, 3 0, 6 0, 9 0, 1 2 0, 1 8 0 or 2 4 0).
TELETEXT This feature is not available in all countries. Teletext is a free service broadcast by most TV stations which gives up-to-the-minute information on news, weather, television programmes, share prices and many other topics. The teletext decoder of this TV can support the SIMPLE, TOP and FASTEXT systems. SIMPLE (standard teletext) consists of a number of pages which are selected by directly entering the corresponding page number.
TOP TEXT The user guide displays four fields-red, green, yellow and blue at the bottom of the screen. The yellow field denotes the next group and the blue field indicates the next block. A Block / group / page selection 1 4 With the blue button you can progress from block to block. Use the yellow button to proceed to the next group with automatic overflow to the next block. With the green button you can proceed to the next existing page with automatic overflow to the next group.
TELETEXT SPECIAL TELETEXT FUNCTIONS A TIME When viewing a TV programme, press this button to display the time at the top right hand corner of the screen. Press this button again to remove the display. In the teletext mode, press this button to select a sub page number. The sub page number is displayed at the bottom of the screen. To hold or change the sub page, press the RED/GREEN, D / E or NUMBER buttons. Press again to exit this function. A SIZE Selects double height text.
APPENDIX TROUBLESHOOTING The TV does not operate properly Check to see if there is any object between the TV and the remote control causing an obstruction. ■ Are batteries installed with correct polarity (+ to +, - to -)? ■ Install new batteries. ■ The remote control does not work Is the sleep timer set? Check the power control settings. Has the Power supply been interrupted. ■ The TV goes into Standby mode automatically if no signal is received and no operation is performed for 15 minutes.
APPENDIX The audio function does not work. + ) button. Press the V O L F or G (or ■ Sound muted? Press M U T E button. ■ Try another channel. The problem may be with the broadcast. ■ Are the audio cables installed properly? ■ Picture OK & No sound No output from one of the speakers Unusual sound from inside the TV APPENDIX 56 ■ Adjust Balance in menu option.
MAINTENANCE Early malfunctions can be prevented. Careful and regular cleaning can prolong the life of your new TV. Caution: Be sure to swith the power off and unplug the power cord before you begin any cleaning. Cleaning the Screen 1 A good way to keep the dust off your screen for a while is to wet a soft cloth in a mixture of lukewarm water and a little fabric softener or dish washing detergent. Wring the cloth until it’s almost dry, and then use it to wipe the screen.
APPENDIX PRODUCT SPECIFICATIONS MODELS Dimensions (Width x Height x Depth) with stand without stand with stand Weight without stand Power requirement MODELS Dimensions with stand (Width x Height x Depth) without stand Weight with stand without stand APPENDIX Power requirement Television System 19LD310-TA 19LD310-LA 22LD310-TA 22LD310-LA 462.4 x 353.0 x 171.0 mm 18.2 x 13.9 x 6.8 inches 533.4 x 397.0 x 171.0 mm 21.0 x 15.6 x 6.7 inches 462.4 x 308.0 x 65.0 mm 18.2 x 12.2 x 2.6 inches 533.
IR CODES (Hexa) Code Function Note Code Function 0B INPUT 08 POWER R/C Button 09 MUTE R/C Button R/C Button (Power On/Off) 53 LIST R/C Button 43 MENU R/C Button 10 ~ 19 Number Key 0 ~ 9 R/C Button 44 OK R/C Button 1A Q.
Record the model number and serial number of the TV. Refer to the label on the back cover and quote this information to your dealer when requiring any service. Model : Serial No.
