Colour Television OWNER’S MANUAL Please read this manual carefully before operating your set. Retain it for future reference. Record model number and serial number of the set. See the label attached on the back cover and quote this information to your dealer when you require service.
INTRODUCTION ENGLISH CONTROLS Front panel 21FU1 series 4 OK 1 5 2 3 PR 1. MAIN POWER (ON/OFF) switches the set on or off. 2. POWER/STANDBY INDICATOR illuminates brightly when the set is in standby mode. dims when the set is switched on. 3. REMOTE CONTROL SENSOR Note : Only use the supplied remote control handset. (When you use others, they won’t be able to function.) 4. MENU (option) selects a menu. 5. OK (option) accepts your selection or displays the current mode.
INTRODUCTION REMOTE CONTROL KEY FUNTIONS ENGLISH 1 11 13 14 10 2 1 2 3 4 5 6 7 8 9 3 0 VOL OK Remote control handset Before you use the remote control handset, please install the batteries. See the next page. 1. POWER switches the set on from standby or off to standby. 8 2. NUMBER BUTTONS Switches the set on from standby or directly select a number. 3. MENU selects a menu. PR 4 All the functions can be controlled with the remote control handset.
9. EYE/ (option) switches the eye function on or off. * 1 Q.VIEW LIST 14 10. MUTE switches the sound on or off. 11. TV/AV selects TV or AV mode. switches the set on from standby. exits the Teletext mode(option). 11 13 10 2 1 2 3 4 5 6 7 8 9 3 0 8 12. I/II/ * selects the language during dual language broadcast. selects the sound output (option). 13. Q.VIEW (or SWAP) returns to the previously viewed programme. PR 4 VOL 14.
INSTALLATION ENGLISH Power This set operates on an AC mains supply, the voltage is as indicated on the label on the back cover. Never apply DC power to the set. In the event of thunderstorms or powercuts, please pull out the aerial and mains plugs. Warning To prevent fire or shock hazard, do not expose the set to rain or moisture. Do not place anything containing liquid on top of the set, this may cause a fire or could give an electric shock.
CONNECTION OF EXTERNAL EQUIPMENT ENGLISH You can connect additional equipment, such as VCRs, camcorders etc. to your set. What is shown here may be somewhat different from your set. Y PB PR COMPONENT DVD INPUT (480i) OUT AV VIDEO (L/MONO) AUDIO (R) IN Aerial socket ANTENNA IN 1. Connect the RF out socket of the VCR to the aerial socket on the back of the set. 2. Connect the aerial cable to the RF aerial in socket of the VCR. 3.
BASIC OPERATION ENGLISH On and off 1. Press the main power button to switch the set on. 2. If the set is in standby mode, press the POWER, D / E, TV/AV or NUMBER buttons on the remote control handset to switch it on fully. 3. Press the POWER button on the remote control handset. The set reverts to standby mode. 4. Press the main power button again to switch the set off.
UNIQUE FUNCTIONS ENGLISH Country Selection (option) 1. 2. 3. 4. 5. Press the MENU button and then D / E button to select the Special menu. Press the G button and then D / E button to select Country. Press the G button and then D / E button to select your correct local country. Press the OK button . Repeatedly press the MENU button to return to normal TV viewing.
SPECIAL FUNCTIONS TELETEXT (OPTION) ENGLISH Teletext (or TOP text) is an optional function, therefore only a set with the teletext system can receive the teletext broadcast. Teletext is a free service broadcast by most TV stations which gives up-to-the-minute information on news, weather, television programmes, share prices and many other topics. The teletext decoder of this TV can support the SIMPLE, TOP and FASTEXT systems.
TV MENU Menu selection 1. 2. 3. 4. Press the MENU button and then D / E button to display each menu. Press the G button and then D / E button to select a menu item. Press the G button to display the sub menu or the pull-down menu. Change the setting of an item in the sub or pull-down menu with the F / G or D / E. You can move to the higher level menu with the OK or F button and to move to the lower level menu press the G button.
AUTO PROGRAME TUNING ENGLISH Up to 100 TV stations can be stored by programme numbers (0 to 99). Once you have preset the stations, you will be able to use the D / E or NUMBER buttons to scan the stations you programmed. Stations can be tuned using automatic or manual modes. All stations that can be received are stored by this method. It is recommended that you use auto programme during installation of this set. 1. Press the MENU button to select the Station menu. 2.
TROUBLESHOOTING CHECK LIST ENGLISH Symptoms No picture, no sound Sound OK, poor picture Picture OK, poor sound Picture blurred Lines or streaks in picture Poor reception on some channels No colour Poor colour Remote control does not work Check these items and try to adjust these The mains plug-(plugged in and switched on) Is the TV switched on Try another channel (weak signal) Check aerial (plugged into TV?) Check aerial (broken lead?) Check aerial Check for local interference Adjust contrast Adjust brigh
