User's Manual
Table Of Contents
- Introduction / Important Safety Precautions
- Using Windows 10
- Using the PC
- Using an AC Adapter and a Battery
- Operation Status Lamps
- Keyboard
- Keyboard Backlight
- Adjusting Screen Brightness and Volume
- Hearing Protection Feature
- Using the Touchpad
- Setting Touchpad
- Using Touch Panel
- Connecting to External Display
- Connecting to Wireless Display
- Connecting an External USB-C™ (Thunderbolt™) Device
- Using USB-C™ (Thunderbolt™) Charging Function
- Bluetooth
- Wired LAN
- Wireless LAN
- Using a Wired/Wireless Router
- Micro SD Slot
- Using Software
- Restoring the System
- Setup and Upgrade
- FAQ
Using Software
153
7 External Display: Allows you to configure the connection mode of an external display connected
to the PC.
8 Hotkey mode setting: Allows you to set the hot keys(F1~F12) so that you can use them without
pressing the Fn key.
9 Airplane Mode: Allows you to set the Airplane Mode. (It turns off the wireless LAN).
10 Silent Mode: Allows you to set the fan to the silent mode.
Power Management Screen
You can check or change the settings related to PC USB-C™ port or battery.
1 Set USB-C™ Charging
• Set Always-On Charging: Allows you to set the USB port so that you can perform charging
using the USB-C™ port even when the PC is turned off.
• Set Charging Function: Sets the charging function for a USB-C™ port (Automatic, Sink, or
Source).
2 Battery State: Allows you to measure the battery lifespan so that you can replace it timely.
3 Extend Battery Life: Allows you to increase the battery lifespan by lowering the battery charging
level to 80 % of the battery capacity.
ENGLISH