Owner's Manual

ENGLISH
14
• Wall Mount (A x B)
A
B
NOTE
• Use the screws specified by VESA standards.
• The wall mount kit includes the installation guide and
all necessary parts.
• The wall mounting bracket is optional.
• The length of the screw may differ for each wall
mounting bracket. Be sure to use the proper length.
• For more information, please refer to the user manual
for the wall mounting bracket.
CAUTION
• Unplug the power cord before moving or installing the
Device to avoid electric shock.
• Installing the Device on the ceiling or on a slanted wall
may result in the Device falling off, which could lead
to injury.
• Applying excessive force when tightening screws may
cause damage to the Device. Damage caused in this
way will not be covered by the product warranty.
• Use the wall mounting bracket and screws that
conform to VESA standards. Damage caused by the
use or misuse of inappropriate components will not
be covered by the product warranty.
• To prevent injury, this apparatus must be securely
attached to the wall in accordance with the
installation instructions. (This pertains only to
Australia and New Zealand.)
• When measured from the back of the Device, the
length of each installed screw must be 8 mm or less.
Wall Mount Plate
Back of the
Device
Maximum 8 mm
Wall Mount Plate
Back of the Device
Screw Dimensions
: M4 x L10