OWNER’S MANUAL LED TV* * LG LED TVs are LCD TVs with LED backlighting. Click! User Guide Please read this manual carefully before operating your set and retain it for future reference. UB85** UB95** UB98** UC97** UG88** UC9 www.lg.
TABLE OF CONTENTS TABLE OF CONTENTS 3 LICENSES ENGLISH ENG 35 MAGIC REMOTE FUNCTIONS 36 36 37 Registering Magic Remote How to use Magic Remote Precautions to Take when Using the Magic Remote 37 USING THE USER GUIDE 38 MAINTENANCE 3 OPEN SOURCE SOFTWARE NOTICE INFORMATION 3 EXTERNAL CONTROL DEVICE SETUP 4 SAFETY INSTRUCTIONS 10 Viewing 3D Imaging (Only 3D models) 38 38 38 Cleaning your TV - Screen, frame, cabinet and stand - Power cord 11 INSTALLATION PROCEDURE 38 TROUBLESHOOTING
LICENSES / OPEN SOURCE SOFTWARE NOTICE INFORMATION / EXTERNAL CONTROL DEVICE SETUP 3 LICENSES Supported licenses may differ by model. For more information about licenses, visit www.lg.com. ENGLISH ENG OPEN SOURCE SOFTWARE NOTICE INFORMATION To obtain the source code under GPL, LGPL, MPL, and other open source licenses, that is contained in this product, please visit http://opensource.lge.com.
SAFETY INSTRUCTIONS SAFETY INSTRUCTIONS Please read these safety precautions carefully before using the product.
SAFETY INSTRUCTIONS yy When mounting TV onto wall make sure to neatly install and isolate cabling from rear of TV as to not create possibility of electric shock /fire hazard. yy Do not drop the product or let it fall over when connecting external devices. Otherwise, this may result in injury or damage to the product. yy Keep the anti-moisture packing material or vinyl packing out of the reach of children. Anti-moisture material is harmful if swallowed.
SAFETY INSTRUCTIONS ENGLISH ENG yy Do not allow any impact, shock or any objects to fall into the unit, and do not drop anything onto the screen. You may be injured or the product can be damaged. yy Unplug the TV from AC mains wall socket if you do not intend to use the TV for a long period of time. Accumulated dust can cause fire hazard and insulation deterioration can cause electric leakage/shock/fire. yy Never touch this product or antenna during a thunder or lighting storm.
SAFETY INSTRUCTIONS yy If you install the TV on a stand, you need to take actions to prevent the product from overturning. Otherwise, the product may fall over, which may cause injury. yy Do not place non-rechargeable batteries in charging device. yy Make sure there are no objects between the remote control and its sensor. yy Signal from Remote Control can be interrupted due to external/internal lighting eg Sunlight, fluorescent lighting.If this occurs turn off lighting or darken viewing area.
SAFETY INSTRUCTIONS yy Take care not to touch the ventilation openings when watching the TV for long periods as the ventilation openings may become hot. This does not affect the operation or performance of the product. ENGLISH ENG yy Periodically examine the cord of your appliance, and if its appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact replacement part by an authorized servicer.
SAFETY INSTRUCTIONS yy Contact the service centre once a year to clean the internal parts of the product. Accumulated dust can cause mechanical failure. yy If the product feels cold to the touch, there may be a small “flicker” when it is turned on. This is normal, there is nothing wrong with product. yy The panel is a high technology display product with resolution of two million to six million pixels.
SAFETY INSTRUCTIONS Viewing 3D Imaging (Only 3D models) WARNING ENGLISH ENG Viewing Environment yy Viewing Time -- When watching 3D contents, take 5 - 15 minute breaks every hour. Viewing 3D contents for a long period of time may cause headache, dizziness, fatigue or eye strain. Those that have a photosensitive seizure or chronic illness yy Some users may experience a seizure or other abnormal symptoms when they are exposed to a flashing light or particular pattern from 3D contents.
INSTALLATION PROCEDURE / ASSEMBLING AND PREPARING 11 NOTE INSTALLATION PROCEDURE 1 2 3 4 Open the package and make sure all the accessories are included. Attach the stand to the TV set. Connect an external device to the TV set. Make sure the network connection is available. You can use the TV network functions only when the network connection is made. * I f the TV is turned on for the first time after it was shipped from the factory, initialization of the TV may take a few minutes.
ASSEMBLING AND PREPARING ENERGY AV MODE INPUT TV SAVING 1 2 3 4 5 6 7 8 9 LIST 0 FLASHBK MARK FAV VOL 3D CH P A G E MUTE MENU INFO Q.MENU ENTER BACK EXIT L/R SELECT FREEZE RATIO ENGLISH ENG Magic remote, Batteries (AA) (Only UB85**, UB95**, UB98**, UC97**, UG88**, 105UC9) (See p.35) Owner’s manual HDMI Cable (Depending on model) (See p.30) Power Cord Cable Holder (Depending on model) (See p.
1 2 ASSEMBLING AND PREPARING Stand Screws 4EA, M4 x L10 4EA, M4 x L20 (Only UC97**) (See p.22) Stand Body / Stand Base Stand Screws 2EA, M4 x L10 10EA, M4 x L14 (Only UG88**) (See p.22) Wall Mount spacers Component gender cable (See p.32) Composite gender cable (See p.32) Cable Managements 2EA (Only UB85**, UB95**) (See p.26) Cable Managements Cinema 3D Glasses The number of 3D glasses may differ depending on the model or country. (Depending on model) Ferrite core (Depending on model) (See p.
ASSEMBLING AND PREPARING Tag On ENGLISH ENG Tag on (Depending on model) NOTE yy The items supplied with your product may vary depending on the model. yy Product specifications or contents of this manual may be changed without prior notice due to upgrade of product functions. yy For an optimal connection, HDMI cables and USB devices should have bezels less than 10 mm thick and 18 mm width. Use an extension cable that supports USB 2.
ASSEMBLING AND PREPARING 15 Separate purchase Separate purchase items can be changed or modified for quality improvement without any notification. Contact your dealer to buy these items. These devices only work with certain models.
ASSEMBLING AND PREPARING Parts and buttons A Type : UB85** C Type : 65/79UB98** Screen Built-in Camera Screen ENGLISH ENG Speakers Speakers Speakers (Only 79UB98**) Remote control and Intelligent1 sensors Power Indicator Joystick Button2 B Type : UB95** Remote control and Intelligent1 sensors LG Logo light Joystick Button2 D Type : 84UB98** Screen Built-in Camera Screen Speakers Speakers Remote control and Intelligent1 sensors LG Logo light Joystick Button3 Remote control and Intell
ASSEMBLING AND PREPARING E Type : UC97** G Type : 105UC9 Screen 17 Built-in Camera Screen ENGLISH ENG Speakers Speakers Remote control and Intelligent1 sensors LG Logo light Joystick Button2 Remote control and Intelligent1 sensors Joystick Button3 Power Indicator CAUTION F Type : UG88** yy Do not place any objects or body parts in area between TV Screen and Speaker Stand assembly. It could cause personal Injury or damage to product.
ASSEMBLING AND PREPARING Using the joystick button You can operate the TV by pressing the button or moving the joystick left, right, up, or down. Basic Functions ENGLISH ENG Power On When the TV is turned off, place your finger on the joystick button and press it once and release it. Power Off When the TV is turned on, place your finger on the joystick button and press it once for a few seconds and release it.
ASSEMBLING AND PREPARING Lifting and moving the TV Please note the following advice to prevent the TV from being scratched or damaged and for safe transportation regardless of its type and size. 19 yy When transporting a large TV, there should be at least 2 people. yy When transporting the TV by hand, hold the TV as shown in the following illustration. ENGLISH ENG CAUTION yy Avoid touching the screen at all times, as this may result in damage to the screen.
ASSEMBLING AND PREPARING Setting up the TV 2 Image shown may differ from your TV. Attaching the stand ENGLISH ENG UB85**, UB95** 1 1 Stand Body (L) Stand Body (R) 2 Stand Base 1 1 2 M4 x L20 4EA Attach the stand to the TV using the upper mounting hole on the back of the TV. Attach the stand to the TV using the lower connection on the back of the TV. 3 NOTE Be sure to check the Stand Body (L), (R), yy when installing on the stand base.
ASSEMBLING AND PREPARING 21 (Only 84UB98**) UB98** 1 ENGLISH ENG 1 Stand Base 2 Wrench 2 4EA M6 x L52 4EA (Insulation Holders) 1 3 CAUTION (Only 65/79UB98**) 2 yy Make sure that the screws are fastened completely. (If they are not fastened securely enough, the TV may tilt forward after being installed.
ASSEMBLING AND PREPARING UC97** 3 1 1 ENGLISH ENG 2 1 M4 x L10 4EA 2 M4 x L20 4EA Stand Body (L) Stand Base Stand Body (R) UG88** 2 1 2 Stand Body (R) 3 Stand Body (L) Stand Base 1 1 2 3 When assembling the stand, lay the front screen protective package included in the product box on a table or flat surface and then place the TV screen face down on the protective package. Attach the stand to the TV using the upper mounting hole on the back of the TV.
ASSEMBLING AND PREPARING 2 CAUTION 3 NOTE 1 * Use at least two people to attach the stand to the TV. 1 When 1 assembling the stand, lay the front screen protective package included in the product box on a table or flat surface and then place the TV screen face down on the protective package. 2 Attach the stand to the TV using the upper mounting hole on the back of the TV. 3 Attach the stand to the TV using the lower connection on the back of the TV.
ASSEMBLING AND PREPARING Mounting on a table 1 Securing the TV to a wall Lift and tilt the TV into its upright position on a table. -- Leave a 10 cm (minimum) space from the wall for proper ventilation. (This feature is not available for all models.) (Only 105UC9) ENGLISH ENG 10 cm m 10 c 10 cm 10 cm 10 cm 2 Connect the power cord to a wall outlet. CAUTION yy Do not place the TV near or on sources of heat, as this may result in fire or other damage.
ASSEMBLING AND PREPARING Mounting on a wall Make sure to use screws and wall mount bracket that meet the VESA standard. Standard dimensions for the wall mount kits are described in the following table.
ASSEMBLING AND PREPARING Tidying cables Image shown may differ from your TV. A B 1 Gather and bind the cables with the Cable Holder. (Only UB98**) ENGLISH ENG CAUTION yy Disconnect the power first, and then move or install the TV. Otherwise electric shock may occur. yy If you install the TV on a ceiling or slanted wall, it may fall and result in severe injury. Use an authorised LG wall mount and contact the local dealer or qualified personnel.
ASSEMBLING AND PREPARING 27 Assembling the AV cover (Only UC97**) (Only 105UC9) 1 Cover Holder Cable Holder 1 AV Port Cover 2 1 Cable management 2 1 1 1 Fix the Cable Management firmly to the TV. (Only 105UC9) 2 2 2 Cable Management CAUTION yy Do not move the TV by holding the cable holder, as the cable holder may break, and injuries and damage to the TV may occur. CAUTION yy If you do not attach the cover holder, the cover may fall off and cause injury.
ASSEMBLING AND PREPARING Using Built-in Camera Preparing Built-in Camera (Only UB98**, 105UC9) ENGLISH ENG You can make a Skype video call or use the motion recognition function using the built-in camera of the TV. This TV does not support the use of an external camera. 1 Pull up the slide at the back of the TV.
ASSEMBLING AND PREPARING / MAKING CONNECTIONS 3 29 MAKING CONNECTIONS Push down the built-in camera when you are not using it. This section on MAKING CONNECTIONS mainly uses diagrams for the 65UB98** models. NOTE Name of Parts of Built-in Camera Protective film Camera Lens Microphone Microphone Checking the Camera’s Shooting Range 1 (Home) button to access the Press the Home menu. Camera and then press the Select Wheel(OK) button.
MAKING CONNECTIONS Antenna connection HDMI connection Connect the TV to a wall antenna socket with an RF cable (75 Ω). Transmits the digital video and audio signals from an external device to the TV. Connect the external device and the TV with the HDMI cable as shown. ENGLISH ENG VHF Antenna UHF Antenna DVD / Blu-Ray / HD Cable Box / HD STB / PC (*Not Provided) or Wall Jack HDMI (*Not Provided- Depending on model) (*Not Provided) NOTE yy Use a signal splitter to use more than 2 TVs.
MAKING CONNECTIONS 1) HDMI specifications may be different for each input port, so make sure to check the device specifications before connecting. DVI to HDMI connection Transmits the digital video signal from an external device to the TV. Connect the external device and the TV with the DVI-HDMI cable as shown. To transmit an audio signal, connect an audio cable. 3) Contact customer service for more information on the HDMI specifications of each input port.
MAKING CONNECTIONS Component connection Composite connection Transmits analog video and audio signals from an external device to the TV. Connect the external device and the TV with a component cable as shown. Transmits analog video and audio signals from an external device to the TV. Connect the external device and the TV with the composite cable as shown. ENGLISH ENG AV VIDEO IN COMPONENT AUDIO PR PB Y AV VIDEO YELLOW (Use the composite gender cable provided.
MAKING CONNECTIONS 33 Audio connection Headphone connection You may use an optional external audio system instead of the built-in speaker. Transmits the headphone signal from the TV to an external device. Connect the external device and the TV with the headphone as shown. ENGLISH ENG Digital optical audio connection Transmits a digital audio signal from the TV to an external device. Connect the external device and the TV with the optical audio cable as shown.
MAKING CONNECTIONS ENGLISH ENG USB connection MHL connection Connect a USB storage device such as a USB flash memory, external hard drive, or a USB memory card reader to the TV and access the SmartShare menu to use various multimedia files. Mobile High-definition Link (MHL) is an interface for transmitting digital audiovisual signals from mobile phones to television sets.
MAGIC REMOTE FUNCTIONS MAGIC REMOTE FUNCTIONS 2 1 CAUTION yy Do not mix old and new batteries, as this may damage the remote control. (POWER) Turns the TV on or off. Navigation buttons (up/down/left/right) Press the up, down, left or right button to scroll the menu. If you press , , or buttons while the pointer is in use, the pointer will disappear from the screen and Magic Remote will operate like a general remote control.
MAGIC REMOTE FUNCTIONS Voice recognition (Depending on model) Network connection is required to use the voice recognition function. ENGLISH ENG 1 Press the Voice recognition button. 2 Speak when the voice display window appears on the left of the TV screen. • The voice recognition may fail when you speak too fast or too slow. • Use the Magic remote no further than 10 cm from your face.
MAGIC REMOTE FUNCTIONS / USING THE USER GUIDE Precautions to Take when Using the Magic Remote USING THE USER GUIDE User Guide allows you to more easily access the detailed TV information. 2 Select User Guide and press the Wheel(OK) button. BACK HOME P MY APPS ENGLISH ENG 1 Press the (Home) button to access the Home menu. yy Use the Magic Remote within the maximum communication distance (10 m).
MAINTENANCE / TROUBLESHOOTING MAINTENANCE Cleaning your TV Clean your TV regularly to keep the best performance and to extend the product lifespan. ENGLISH ENG CAUTION yy Make sure to turn the power off and disconnect the power cord and all other cables first. yy When the TV is left unattended and unused for a long time, disconnect the power cord from the wall outlet to prevent possible damage from lightning or power surges.
SPECIFICATIONS 39 SPECIFICATIONS (Only UB98**, 105UC9) Wireless module(LGSWF41)Specifications IEEE 802.11a/b/g/n/ac Frequency Range 2400 to 2483.5 MHz 5150 to 5250 MHz 5725 to 5850 MHz Output Power (Max.) 802.11a: 14.5 dBm 802.11b: 16 dBm 802.11g: 13.5 dBm 802.11n - 2.4GHz: 14 dBm 802.11n - 5GHz: 15.5 dBm 802.
SPECIFICATIONS (Only UB85**, UB95**, UC97**, UG88**) Wireless module(LGSBW41)Specifications Wireless LAN ENGLISH ENG Standard IEEE 802.11a/b/g/n Frequency ragne 2400 to 2483.5MHz 5150 to 5250 MHz 5725 to 5850 MHz Output power(Max.) 802.11a: 13 dBm 802.11b: 15 dBm 802.11g: 14 dBm 802.11n - 2.4GHz: 16 dBm 802.11n - 5GHz: 16 dBm Bluetooth Standard Frequency ragne Output power(Max.) Bluetooth Version 3.0 2400 to 2483.
SPECIFICATIONS Operating Temperature 0 °C to 40 °C Operating Humidity Environment condition Less than 80 % Storage Temperature -20 °C to 60 °C Storage Humidity Less than 85 % Programme Coverage Analogue TV DTMB PAL D/K, PAL I, NTSC M DTMB : 21 to 69 PAL D/K : VHF/UHF 1 to 69, Cable 1 to 47 PAL I : VHF/UHF 1 to 69, Cable 1 to 47 NTSC M : VHF/UHF 2 to 78, Cable 1 to 71 External Antenna Impedance 75 Ω Product specifications may be changed without prior notice due to upgrade of product functio
SPECIFICATIONS MODELS 105UC9-CA Dimensions (W x H x D) With stand (mm) Weight With stand (kg) Without stand(mm) ENGLISH ENG Without stand (kg) Power requirement 2494 x 1512 x 486 155 AC 100-240 V~ 50 / 60 Hz
Record the model number and serial number of the TV. Refer to the label on the back cover and quote this information to your dealer when requiring any service.
OWNER’S MANUAL EXTERNAL CONTROL DEVICE SETUP Please read this manual carefully before operating the set and retain it for future reference. www.lg.
2 KEY CODES ENGLISH ENG KEY CODES • This feature is not available for all models.
EXTERNAL CONTROL DEVICE SETUP 3 • Image shown may differ from your TV. Connect the USB to Serial converter/RS-232C input jack to an external control device (such as a computer or an A/V control system) to control the product’s functions externally. Note: The type of control port on the TV can be different between model series. * Please be advised that not all models support this type of connectivity. * Cable is not provided.
USB USB IN IN 4 EXTERNAL CONTROL DEVICE SETUP (PC) (PC) (TV) (TV) RS-232C IN (CONTROL SERVICE) • You need to purchase the phone-jack to RS-232 cable required for &the connection between the PC and the TV, which is specified in the manual. RS-232C IN (PC) (PC) (CONTROL & SERVICE) * For other models, connect to the USB port. * The connection interface may differ from your TV.
EXTERNAL CONTROL DEVICE SETUP 5 • Baud rate : 9600 bps (UART) • Data length : 8 bits • Parity : None ENGLISH ENG Communication Parameters • Stop bit : 1 bit • Communication code : ASCII code • Use a crossed (reverse) cable. Command reference list (Depending on model) COMMAND1 COMMAND2 DATA (Hexadecimal) 01. Power* k a 00 to 01 02. Aspect Ratio k c (p.7) 03. Screen Mute k d (p.7) k e 00 to 01 k f 00 to 64 06. Contrast k g 00 to 64 07. Brightness k h 00 to 64 08.
6 EXTERNAL CONTROL DEVICE SETUP ENGLISH ENG Transmission / Receiving Protocol Transmission [Command1][Command2][ ][Set ID][ ][Data][Cr] [Command 1] : First command to control the TV. (j, k, m or x) [Command 2] : Second command to control the TV. [Set ID] : You can adjust the [Set ID] to choose desired monitor ID number in option menu. Adjustment range in TV is 1 to 99. If [Set ID] value is selected to ‘0’, every connected set can be controlled.
EXTERNAL CONTROL DEVICE SETUP 7 01. Power (Command: k a) ►► To control Power *On or Off of the set. Transmission[k][a][ ][Set ID][ ][Data][Cr] Data 00 : Power Off 01 : *Power On Ack [a][ ][Set ID][ ][OK/NG][Data][x] ►► To Show TV is Power On or *Off Transmission [k][a][ ][Set ID][ ][FF][Cr] Ack [a][ ][Set ID][ ][OK][Data][x] * Similarly, if other functions transmit ‘FF’ data based on this format, Acknowledgement feedback presents status about each function. 02.
8 EXTERNAL CONTROL DEVICE SETUP ENGLISH ENG Data Min : 00 to Max : 64 * (Depending on model) Ack [i][ ][Set ID][ ][OK/NG][Data][x] 09. Tint (Command: k j) ►► To adjust the screen tint. You can also adjust tint in the PICTURE menu. Transmission [k][j][ ][Set ID][ ][Data][Cr] Data Red : 00 to Green : 64 Ack [j][ ][Set ID][ ][OK/NG][Data][x] 10. Sharpness (Command: k k) ►► To adjust the screen sharpness. You can also adjust sharpness in the PICTURE menu.
EXTERNAL CONTROL DEVICE SETUP 0 0 5th Band 0 0 1 0 1 20(decimal) Acknowledgement [v][ ][Set ID][ ][OK/NG][Data][x] * It depends on model, and can adjust when sound mode is EQ adjustable value. 19. Energy Saving (Command: j q) ►► To reduce the power consumption of the TV. You can also adjust Energy Saving in PICTURE menu.
10 EXTERNAL CONTROL DEVICE SETUP ENGLISH ENG Number - 22 : Antenna TV (DTV) – Don’t Use Physical Channel Number - 26 : Cable TV (CADTV) - Don’t Use Physical Channel Number - 46 : Cable TV (CADTV) – Use Major Channel Number Only (One Part Channel) Two bytes are available for each major and minor channel data, but usually the low byte is used alone (high byte is 0). * Tune Command Examples: 1. Tune to the Analog cable (NTSC) channel 35.
EXTERNAL CONTROL DEVICE SETUP ►► To select input source for main picture. Transmission [x][b][ ][Set ID][ ][Data][Cr] Data 00 : DTV 01 : CADTV 02 : Satellite DTV 10 : ATV ISDB-BS (Japan) 03 : ISDB-CS1 (Japan) 04 : ISDB-CS2 (Japan) 11 : CATV O 01 X X X 02 X X X 03 X O O [Data03][x] [t][ ][Set ID][ ][NG][Data00][x] 40 : Component1 60 : RGB 41 : Component2 90 : HDMI1 92 : HDMI3 91 : HDMI2 93 : HDMI4 26.
12 EXTERNAL CONTROL DEVICE SETUP ENGLISH ENG 27. Auto Configure (Command: j u) (Depending on model) ►► To adjust picture position and minimize image shaking automatically. It works only in RGB (PC) mode.
