Troubleshooting Guide

45TROUBLESHOOTING
ENGLISH
UE
UNBALANCE ERROR
The load is too small.
e washer to balance the load.
Heavy articles are mixed with lighter items.
milar weight to allow the washer to evenly
distribute the weight of the load for spinning.
The load is out of balance.
ve become tangled, preventing the automatic
rebalancing from working properly.
dE
,
dE1
,
dEz
,
dE4
DOOR OPEN ERROR
The door is not secured.
call for service.
OE
WATER OUTLET
ERROR
Drain hose is kinked, pinched, or clogged.
s or kinks and is not pinched behind or under
the washer.
The end of the drain hose is more than 96 inches (2.4 m) above the bottom of the
washer.
so that it is lower than 96 inches (2.4 m).
tE
TEMPERATURE
SENSOR ERROR
Control error.
displayed, call for service
FE
OVERFLOW ERROR
Water level is too high due to a faulty water valve.
the washer, and call for service.
PE
PRESSURE SENSOR
ERROR
The water level sensor is not working correctly.
the washer, and call for service.
LE
MOTOR LOCKED
ERROR
A motor error has occurred.
displayed, call for service.
svd
OVERSUDSING
DETECTION
Oversudsing of detergent
PF
WATER LEVEL
SENSOR ERROR
Water level is too low or high compared to the load.
displayed, call for service.
FF
FROZEN ERROR
Inlet hose, drain hose or drain pump is frozen.
Care in Cold Climates.
CL
CONTROL LOCK
FUNCTION
The Control Lock function is on to prevent anyone from changing cycles or operating
the washer.
Control Lock function in the control panel. See Control Lock under Options
and Extra Functions.
tcL
TUB CLEAN ALARM
It is time to run the Tub Clean cycle.
Tub Clean cycle is running or needs to be run
to clean the washer drum.
Problem Possible Cause & Solution