Use and Care Manual

ManualsBrandsLG STUDIO ManualsAppliances24 in. Panel Ready Top Control Wi-Fi Dishwasher with Stainless Steel Tub 3rd Rack and TrueSteam

43TROUBLESHOOTING

ENGLISH

Wi-Fi

AE

Water leakage

• Turn off the water supply to the dishwasher and call an LG Electronics Customer

Information Center at 1-800-243-0000 (U.S.A.) or 1-888-542-2623 (Canada).

• The dishwasher makes an alert sound for 10 seconds, and runs the drain pump

intermittently. If power is turned off to the machine, the machine powers back on

automatically until the AE error is resolved.

FE

Excessive Water supplied.

• Please call an LG Electronics Customer Information Center at 1-800-243-0000 (U.S.A.) 1-

888-542-2623 (Canada).

HE

Heater circuit failure.

• Please call an LG Electronics Customer Information Center at 1-800-243-0000 (U.S.A.) 1-

888-542-2623 (Canada).

tE

Water temperature sensor error

• Please call an LG Electronics Customer Information Center at 1-800-243-0000 (U.S.A.) 1-

888-542-2623 (Canada).

LE

Wash motor error

• Please call an LG Electronics Customer Information Center at 1-800-243-0000 (U.S.A.) 1-

888-542-2623 (Canada).

NE

Vario motor error

• Please call an LG Electronics Customer Information Center at 1-800-243-0000 (U.S.A.) 1-

888-542-2623 (Canada).

P1, Pz, P3, P4

The Download Cycle is selected.

• This is not an error code. This code indicates the current Download Cycle.

N:#, U:#, d:#, t#

(# is a number.)

Test mode is selected.

• This is not an error code. This code is used when testing the dishwasher. Power the unit off

and on and the code will disappear.

LO, L1, Lz, L3, L4

Rinse aid level setting mode is selected.

• This is not an error code. This code indicates the current rinse aid level. For more

information, refer to the Adding Cleaning Products section.

HO, H1, Hz, H3, H4

Softener Hardness Level setting mode is selected.

• This is not an error code. This code indicates the current softener hardness level. For more

information, refer to the Setting the Water Softening System section.

CL

Control Lock is activated.

• This is not an error code. This code indicates that the control lock is activated. Press and

hold Delay Start for three seconds.

Problem Possible Cause & Solution

Trouble connecting

appliance and

smartphone to Wi-Fi

network

The password for the Wi-Fi network was entered incorrectly.

• Delete your home Wi-Fi network and begin the connection process again.

Mobile data for your smartphone is turned on.

• Turn off the Mobile data on your smartphone before connecting the appliance.

Problem Possible Cause & Solution

en-us_main.book.book Page 43 Thursday, December 22, 2022 4:06 PM