Use and Care Manual

11INSTALLATION
ENGLISH
Installation Overview
Please read the following installation instructions
first after purchasing this dishwasher or
transporting it to another location.
a Preparing Cabinet Opening
b Preparing Dishwasher
c Preparing Water and Electrical Connections
d Sliding Dishwasher into Cabinet Opening
e Connecting Water Supply Line and Power
f Connecting the Drain Hose
g Leveling Dishwasher
h Securing Cabinet Panel to Dishwasher
i Securing Dishwasher in Cabinet Opening
j Final Installation Check
Product Dimensions
Product
Cabinet Panel
Preparing Cabinet Opening
This dishwasher is designed to fit a standard
dishwasher opening. An opening may be needed
on both sides to route plumbing and electrical
connections.
• To ensure proper drainage, install the
dishwasher no more than 12 ft. (3.65 m) from
the sink.
• The location must have sufficient space for the
dishwasher door to open easily and provide at
least 0.1” (2 mm) between the dishwasher and
the cabinet sides.
• If installing the dishwasher in a corner, leave a
minimum of 2” (50 mm) between the dishwasher
and the adjacent wall.
• The adjacent wall must be free of obstructions.
• For flush installations only, you may remove the
cabinet brace
a inside the cabinet.
Choosing the Proper Location
1 Select a location as close to the sink as
possible for easy connections to water supply
line, drain hose and electrical connection.
23 1/2”
(598 mm)
18”
(455 mm)
32 1/16"
(815 mm)
21 7/8”
(554 mm)
23 1/4 " - 23 3/4 " (590 - 603 mm
)
5/8 - 7/8 "
(16 - 22 mm)
28 3/8 " - 30 11/16"
(720 - 780 mm)
5.5 lb (2.5 kg) ≤ ≤ 24.2 lb (11 kg)
en-us_main.book.book Page 11 Thursday, December 22, 2022 4:06 PM