Use and Care Manual
20
USINg thE OVEN
Setting the CONVECTION ROAST Mode 
1.  Turn the Oven Mode knob to select the CONV. 
ROAST mode. 350°F (175°C) appears in the display.
2.  Set the oven temperature. For example, turn the 
Time/Temp knob clockwise to set the temperature 
to 375°F.
3.  Touch START. The display shows CONV ROAST and 
the temperature, starting at 100°F (35°C). As the 
oven preheats, the display shows the increasing 
temperature in 5-degree increments. Once the 
oven reaches the adjusted set temperature, a tone 
sounds. The display shows the auto-converted 
oven temperature (reduced by 25°F or 14°C), CONV 
ROAST, and the fan icon.
4.  Turn the Oven Mode knob to the OFF position to 
cancel Convection Roast at any time.
CONVECTION ROAST
The Convection Roast mode is designed to give optimum 
cooking performance for roasting meats and poultry. 
Preheating is not necessary for meats and poultry. Heated 
air circulates around the food from all sides, sealing in 
juices and avors. Foods are crispy brown on the outside 
while staying moist on the inside. Convection Roast is 
especially good for large tender cuts of meat.
The heating elements and a fan turn o immediately 
when the door is opened. They turn on again in 
approximately 1 seconds after the door is closed. 
When preparing meats for roasting, use the broiler 
pan and grid. The broiler pan catches grease spills 
and the grid helps prevent grease splatters. Adjust 
the Oven Mode knob to the OFF position to cancel 
the Convection Roast feature at any time.
 NOtE
It is normal for cooling fans to run after any cooking 
cycle is complete, to protect the control panel.
 NOtE
ROAST
Use the ROAST mode to cook large cuts of meat.
Setting the ROAST Mode
1.  Turn the Oven Mode knob to select the ROAST 
mode. 350°F (175°C) appears in the display.
2.  Set the oven temperature in the display. 
For example, turn the Time/Temp knob clockwise 
to set the temperature to 375°F.
3.  Touch START.
It is normal for cooling fans to run after any cooking 
cycle is complete, to protect the control panel.
 NOtE
• The heating elements turn o immediately 
when the door is opened. They turn on again in 
approximately 1 seconds after the door is closed. 
• When preparing meats for roasting, use the broiler 
pan and grid. The broiler pan catches grease spills 
and the grid helps prevent grease splatters.
• Turn the Oven Mode knob to the OFF position to 
cancel Roast at any time.
 NOtE
Changing the Temperature while Roasting
1.  Turn the Time/Temp knob to reset the oven 
temperature.  
For example, turn the knob clockwise to reset the 
temperature from 375°F to 425°F.
2.  Touch START.
Displays for the CONV. ROAST mode










