Installation Guide

18
INSTALLATION
2
Pull the upper pullout drawer open to full
extension.
3
Gently lift and pull out the ice bin.
On the left rail, use a flat blade screwdriver
to push in on the tab to release the drawer
from the rail, as shown below. Once the
left side is loose, push the tab on the right
side with your finger to release the drawer.
Lift the front of the drawer up, then pull it
straight out.
4
Remove the Durabase™ basket from the
rails. Remove the screws from the rails at
both ends.
5
Grip both sides of the freezer door and pull it
up to remove it from the rails.
6
Hold both rails and push them in
simultaneously.
CAUTION
Do not hold the handle when removing or
replacing the door. The handle may come
off, causing personal injury.
1
Open the freezer door to full extension.
Open the lower pullout drawer and lift it up
and out to remove it.