User guide

MICRO Hi-Fi SYSTEM ] USER GUIDE
9
Use your player as an alarm clock
Press and hold TIMER for two seconds. Each function, TUNER, CD, USB,
TAPE flashes for two seconds. Press SET when the function you want to
be woken by is showing. If you choose TUNER, ‘PLAY’ and ‘REC’ flash,
PLAY and REC. Choose one of them.
If you choose TUNER and PLAY you will be shown the stations you have
saved as presets. Use bb or BB to select the station you want, then press
SET.
You will be shown the ON TIME display. This is where you set the time you
want the alarm to go off. Use bb or BB to change the hours and minutes
and SET to save.
You will then be shown the OFF TIME display. This is where you set the
time you want the function to stop. Use bb or BB to change the hours and
minutes and press SET to save.
Next you will be shown the volume (VOL) you want to be woken by.
Use bb or BB to change the volume and SET to save. Switch the system
off. The clock icon shows that the alarm is set.
When the system is turned off you can check the time the alarm is set for
by pressing TIMER.You can also turn the alarm on and off by pressing
TIMER.To set the alarm to go off at a different time, switch the system on
and reprogramme following the same steps as initially.
Setting the Clock
1. Turn the power on:
2. Press for at least 2 seconds:
3. Choose from either:
AM 12:00 (for an am and pm
display) or 0:00 (for a 24 hour
display).
4. Confirm your selection:
5. Select the hours:
6. Press:
7. Select the minutes:
8. Press:
USER EQ
You can listen to music with the desired sound effect (BASS, MIDDLE
and TREBLE).
1. Select a “USER EQ”:
2. When “USER EQ” is
displayed, press:
3. Select the sound effect you
want among BASS, MIDDLE
or TREBLE:
4. Adjust sound level (MIN, -4 to
+4, MAX):
5. Repeat the steps from 3 to 4
to set other sound effect:
6. Press:
ON PLAYER ON REMOTE
SET
bB/
[]
PLAY
or
xx
STOP
bb or BB
SET
EQ master
ON PLAYER ON REMOTE
11
/
]]
CLOCK
bb or BB
SET
bb or BB
SET
bb or BB
SET
POWER
CLOCK