User guide

Recording to USB - More you can do
To select recording bit rate and speed
1 Press
zz
REC on the player or
zz
REC on the remote control for longer than
3 seconds.
2 Use . / > on the player or . bb/BB > on the remote control to
select the bit rate.
3 Press
zz
REC or
zz
REC again to select the recording speed.
4 Use . / > or . bb/BB > to select a desired recording speed.
X 1 SPEED
- You can listen to music while recording it.
X 2 SPEED
- You can just recording the music file.
5 Press
zz
REC or
zz
REC to finish the setting.
NOTES :
But, it's impossible for radio or portable devices to set the recording speed.
Recording Music file in disc source to USB
One track recording -
If the USB recording is started during playback of the CD, the one track/ file
would be recording into the USB.
All tracks recording -
If the recording button is pressed at the CD stop, all tracks/ files would be
recording.
Program list recording -
USB records after creating your own program if you want to record the track
you want. (Audio CD, MP3, WMA)
Pausing recording
During recording, press
zz
REC to pause recording. Press
zz
REC to continue
recording. (Only Radio, Portable)
When you are recording, look out for the following
• When you stop recording during playback, the file that has been recorded
at that time will be stored.(Audio CD only)
• Do not remove the USB device or turn off the unit during USB recording. If
not, an incomplete file may be made and not deleted on PC.
• If USB recording does not work, the message like “NO USB”, “ERROR”,
“ FULL” is displayed on the display window.
• Multi card reader device or External HDD can not be used for USB
recording.
• A file is recoreded by 512 Mbyte when you record for a long term.
• You may not record more than 999files.
• It’ll be stored as follows.
11
Synchronized Recording from CD to Tape
1. Open the tape door
2. Insert a blank tape
3. Select the CD function
4. Start the Recording
The synchronized recording is
started automatically after about 7
seconds.
5. To stop a Recording
ON REMOTEON UNIT
-
-
FUNCTION
-
-
xx ZZ
-
FUNCTION
zB
xx ZZ
Recording to USB
You can record a various sound source to USB.
1. Connect the USB device to the
unit.
2. Select a mode in which you want
to record.
Play back a sound source first.
3. Start the recording: “REC” is
displayed.
4. To stop recording, press
-
FUNCTION
zz
REC
xx
-
FUNCTION
zz
REC
xx
ON UNIT ON REMOTE
AUDIO CD
MP3/ WMA
The other sources
XC14-D0U.ADEULL_ENG_3936 4/27/09 10:29 PM Page 11