LGEUA_XC62_ENG_MFL38289221 MICRO Hi-Fi SYSTEM OWNER’S MANUAL MODEL: XC - U62X XC - U62A/D/X XCS - U62F Before connecting, operating or adjusting this product, please read this instruction booklet carefully and completely. Internet address ; http://ua.lge.com Customer Information Center LG ; (380-44) 490-7777, 8-800-303-0000.
Safety Precaution CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
Before use Before use Contents Notes on Discs Before use About the symbols for instruction Notes on Discs . . . . . . . . . . . . . Notes on Tapes . . . . . . . . . . . . . Front / Back Panel . . . . . . . . . . . Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 .3 .3 .4 .5 Connection Speaker System Connection . . . . . . . . . . . .6 Antenna (Aerial) Connection . . . . . . . . . . . .6 Auxiliary Function . . . . . . . . .
Front / Back Panel 13 1 2 12 3 11 10 14 9 8 15 4 5 6 17 7 16 1. DISPLAY WINDOW 7. Z PUSH EJECT position 2. 1 /]] (POWER) 8. 3. bB/[] PLAY(PAUSE) 9. • M (CD SKIP/SEARCH) 4. • m (CD SKIP/SEARCH) (FAST REWIND PLAY) • TUNE.- (Headphone jack) : 11. x STOP 3.5mm 6. • FUNCTION (FM, AM, CD, USB, AUX, PORTABLE, TAPE) 12. • TIMER • CLOCK • SET (RDS - OPTIONAL) • XDSS plus 13. DISC TRAY • PLAY MODE 14. AM/FM ANTENNA TERMINAL ST./MONO 4 (FAST FORWARD PLAY) • TUNE.+ 10. VOLUME CONTROL KNOB 5.
POWER PRESET/FOLDER( / ) SLEEP CD FUNCTION B/[] (PLAY/PAUSE) • x (CD STOP) • bb/B BB>(CD SKIP/SEARCH)• .b TUN.-/+ • REPEAT • D.SKIP XTS Pro • XDSS plus • EQ master • RDS (Radio Data System) FUNCTION RDS : OPTIONAL • PTY : OPTIONAL • PTY SEARCH : OPTIONAL • 3 Detach the battery cover on the rear of the remote control, and insert two R03 (size AAA) batteries with 3 and # aligned correctly.
Connection Speaker System Connection Connect the speaker cables to the speaker terminal. RED Front speaker (Right) Front speaker (Left) BLACK Notes: • Be sure to match the speaker cable to the appropriate terminal on the components: + to + and – to –. If the cords are reversed, the sound will be distorted and will lack base. • If you use front speakers with low maximum input rating, adjust the volume carefully to avoid excessive output on the speaker. • Connect the Left/Right speaker correctly.
Operation Basic Operation EQUALIZER Effect Connect a headphone plug ( 3.5 mm) into the jack to listen to the sound through headphones. Connecting headphones (not supplied) will switch off the speakers. You can choose 7 fixed sound impressions and adjust the BASS, MIDDLE and TREBLE. - You can select a desired sound mode by using EQ master. NORMAL → USER EQ → POP → CLASSIC RANDOM Press RANDOM, play tracks/files you can in a random order or cancel it.
Sleep Timer Function When the sleep timer is used, the power is automatically turned off after the specified time has elapsed. 1. Press SLEEP to set the desired sleep time. The SLEEP indicator and sleep time appear on display window. 2. Press SLEEP once, the setting changes in the following order. SLEEP 180 → 150 → 120 → 90 → 80 → 70 → 60 → 50 → 40 → 30 → 20 → 10 → OFF (No display) → SLEEP 180 ... Notes: • If you press SLEEP while the sleep time is displayed, the SLEEP time is reset.
is not supported. 3. USB Flash Drive : Devices that support USB2.0 or USB1.1. Basic Playback 1. Connect the USB device to the USB connector of your unit. 2. Press USB to select USB function. “CHECKING” appears on display window, and then the total number of files is displayed. 3. Press B/[[] (PLAY/PAUSE). In addition, you can also play using the NUMERIC buttons. To Remove the USB from the unit 1. Press FUNCTION repeatedly to select other modes. 2. Remove the USB from the unit.
RADIO Function RDS Function - OPTIONAL Programme Search (PTY) About RDS A major benefit of RDS is its ability to encode broadcasts with Programme Type (PTY) codes that indicate the type of material being broadcast. The following list shows the abbreviations used to indicate each PTY along with an explanation of the PTY. This unit is equipped with RDS (Radio Data System), which brings a wide range of information to FM radio.
You can preset 50 stations for FM and AM. 1. Press FUNCTION to select the frequency (AM or FM) you want. 2. Select a station you want by pressing TUN.-/+ on the remote control or TUNE.-/+ on the front panel. Tuning in automatically - Press TUN.-/+ or TUNE.-/+ for more than 0.5 second. Scanning stops when the unit tunes in a station. Tuning in manually - Press TUN.-/+ or TUNE.-/+ briefly and repeatedly. 3. Press PROGRAM/MEMO. A preset number will flash on display window. 4.
CD Function Basic Playback 1. Press FUNCTION to select the CD function. If no disc is loaded then “NO DISC” is displayed. 2. Press Z CD OPEN and place the disc into the disc tray. Note: To load an 8cm (3 inch) disc, put it onto the inner circle of the tray. 3. Press Z CD OPEN to close the disc compartment. 4. Press B/[[] (PLAY/PAUSE). You can also play an Audio CD or MP3/WMA CD using the NUMERIC buttons.
Reference Troubleshooting Cause • The power cord is disconnected. About MP3/WMA MP3/WMA Disc compatibility with this unit is limited as follows: 1. Sampling Frequency 8 - 48kHz(MP3), 32 - 48kHz(WMA) 2. Bit rate 8 - 320kbps(MP3), 48 - 320kbps(WMA) 3. CD-R physical format should be “ISO 9660” 4. If you record MP3/WMA files using the software which cannot create a FILE SYSTEM, for example “Direct-CD” etc., it is impossible to playback MP3 files.
Specifications General Power supply Power consumption Net Weight External dimensions (WxHxD) Refer to the back panel of the unit. Refer to the back panel of the unit. 3.4 kg 170 x 243 x 282 mm Tuner FM Tuning Range Intermediate Frequency Signal to Noise Ratio Frequency Response AM Tuning Range Intermediate Frequency Signal to Noise Ratio Frequency Response 87.5 - 108.0 MHz or 65 - 74 MHz, 87.5 - 108.0 MHz 10.
