User guide

Operating20
Operating
3
Radio Operations
Listening to the radio
1. Press FUNCTION until FM appears in the display
window.
The last received station is tuned in.
2. Press and hold TUN. -/+ for about 2 seconds
until the frequency indication starts to change,
then release. Scanning stops when the unit
tunes in a station.
Or
Press TUN. -/+ repeatedly.
3. Adjust the volume by rotating VOLUME on
the unit or by pressing VOL +/- on the remote
control repeatedly.
Presetting the Radio Stations
You can preset 50 stations for FM.
Before tuning, make sure to turn down the volume.
1. Press FUNCTION until FM appears in the display
window.
2. Select the desired frequency by pressing TUN.
-/+.
3. Press PROG./MEMO. a preset number will  ash
in the display window.
4. Press PRESET
W
/
S
to select the preset number
you want.
5. Press PROG./MEMO. The station is stored.
6. Repeat steps 2 to 5 to store other stations.
7. To listen a preset station, press
PRESET
W
/
S
.
Deleting all the saved stations
1. Press and hold PROG./MEMO. for two seconds.
“ERASE ALL” will  ash up on the unit display.
2. Press PROG./MEMO. to erase all saved radio
stations.
Improving poor FM reception
Press PLAY (
d
), MO./ST on the remote control.
This will change the tuner from stereo to mono and
usually improve the reception.
Seeing information about a
Radio station
The FM tuner is supplied with the RDS (Radio Data
System) facility. This shows information about
the radio station being listened to. Press RDS
repeatedly to cycle through the various data
types.
PS
(Programme
Service Name)
The name of the channel will
appear in the display.
PTY
(Programme
Type
Recognition)
The programme type (e.g. Jazz
or News) will appear in the
display.
RT (Radio Text)
A text message contains special
information from the broadcast
station. This text may scroll
across the display.
CT (Time
controlled by
the channel)
This shows the time and date as
broadcast by the station.
You can search the radio stations by programme
type by pressing RDS. The display will show the last
PTY in use. Press PTY one or more times to select
your preferred programme type. Press and hold
A/D
. The tuner will search automatically. When a
station is found the search will stop.
XB16-D0U-ADEULL-ENG.indd 20XB16-D0U-ADEULL-ENG.indd 20 11. 05. 17  5:3911. 05. 17  5:39