User guide

4
Setting up
1
Video Out connection
Connect the VIDEO
OUTPUT(MONITOR) jack on the
unit to the corresponding input jack
on your TV using a Video cable.
3
Fit the AM loop aerial to
its stand (Optional)
Connect the AM loop aerial to the
unit. Then unfold and install the
aerial as below.
2
Connect the wires to the unit.
Match each wire’s coloured band to the same coloured
connection terminal on the reverse of the unit.
To connect the cable to the unit, press each plastic
fi nger pad to open the connection terminal. Insert the
wire and release the fi nger pad.
Notes
• If TV screen becomes discolored do not place front
speakers within 30cm from TV.
• Be sure to match the speaker cord to the appropriate
terminal on the components: + to + and – to –. If the
cords are reversed, the sound will be distorted and
will lack base.
5
Plug the unit plug into a wall socket.
1
4
5
2
4
Stretch the FM aerial.
The reception will be at its best when the end of the
aerial is stretched to be in a straight line and horizontal.
3
FM wire antenna