User guide

Operating16
Operating
3
y
If this unit displays an error message, follow
the message. An error message “ERROR”.
- Your iPod is not connected  rmly.
- This unit recognizes your iPod as an
unknown device.
- Your iPod is exceptionally low in power.
/
The battery needs to be charged.
/
If you charge the battery while iPod
is extremely low in power, it may take
longer to be charged.
y
iPod does not support recording function
when connected.
y
Depending on your iPod’s software version,
it may not be possible to control your iPod
from this unit. We recommed installing the
latest software version.
y
If you use an application, make a call, or
send and receive SMS text message, etc. on
iPod touch or iPhone, disconnect it from
iPod dock of this unit and then use it.
y
When iPod source is selected, you can not
enjoy audio through the headphone jack.
y
If you have a problem with your iPod, please
visit www.apple.com/support/ipod.
,
Note
Listening to music from your
external device
The unit can be used to play the music from many
types of external device.
(Refer to the page 9)
1. Connect the external device to the PORT. IN
connector of the unit.
2. Turn the power on by pressing
1
/
!
(Power).
3. Select the PORTABLE function by pressing
FUNCTION on the remote control or FUNC. on
the unit.
4. Turn the external device and start it playing.
Recording to USB
1. Connect the USB device to the unit.
2. Select a function by pressing FUNCTION on the
remote control or FUNC. on the unit.
One track recording - You can record to USB
after playing a  le you want.
All tracks recording - You can record to USB after
stop.
Program list recording - After showing the
programmed list, you can record it to USB.
3. Start the recording by pressing REC. on the unit
or
X
REC on the remote control.
4. To stop recording, press
I
on the unit or
Z
ENTER on the remote control.
To select recording bit rate
and speed
1. Press REC. on the unit or
X
REC on the remote
control for longer than 3 seconds on the state
of stop.
2. Use
C
/
V
on the remote control or
/
on the unit to select the bit rate.
3. Press REC. on the unit or
X
REC on the remote
control again to select the recording speed.
4. Press
C
/
V
on the remote control or
/
on the unit to select a desired
recording speed; (Only AUDIO CD)
X1 SPEED
- You can listen to music while recording it.
X2 SPEED
- You can just record the music  le.
5. Press REC. on the unit or
X
REC on the remote
control to  nish the setting.
XA146-D0P-ADEULL-ENG.indd 16XA146-D0P-ADEULL-ENG.indd 16 11. 12. 02  10:0511. 12. 02  10:05