User guide

Operating14
Operating
3
Using your player as an alarm
clock
1. Turn the unit on.
2. Press TIMER. Each functions  ashes.
3. Press SET/RDS when the clock you want to be
woken up is showed.
4. “ON TIME” will be displayed. This is your desired
time to unit turns on. Press
C
/
V
on the
remote control or
/
on the unit to
change the hours and minutes and press
SET/RDS to save.
5. The “OFF TIME” will be displayed. This is your
desired time to unit turns o .
6. Press
C
/
V
on the remote control or
/
on the unit to change the hours and
minutes and press SET/RDS to save.
7. Press
C
/
V
on the remote control or
/
on the unit to change the volume
and press SET/RDS to save.
8. Press TIMER button 2 times. You can check the
setting status.
y
If you set the clock time, you can check the
time by pressing CLOCK even when the
player is turned o .
y
if you press “CLOCK” on state of the unit
turned o , you can see state in order of
“CLOCK” and “TIMER”.
,
Note
Sleep Timer Setting
Press SLEEP repeatedly to select delay time
between 10 and 180 minutes. After the delay time,
unit will turn o .
To cancel the sleep function, press SLEEP
repeatedly until “SLEEP 10” appears, and then press
SLEEP once again while “SLEEP 10” is displayed.
y
You can check the remaining time before
the unit turns o .
y
Press SLEEP. The remaining time appears in
the display window.
y
Sleep function will work after dimmer.
,
Note
Dimmer
Press SLEEP once. The display window will be
darkening by half. To cancel it, press SLEEP
repeatedly until dim o .
XA146-D0P-ADEULL-ENG.indd 14XA146-D0P-ADEULL-ENG.indd 14 11. 12. 02  10:0511. 12. 02  10:05