User guide

Operating12
Operating
3
Radio Operations
Listening to the radio
1. Press FUNCTION on the remote control or
FUNC. on the unit until FM appears in the
display window.
The last received station is tuned in.
2. Press and hold TUN -/+ for about two seconds
until the frequency indication starts to change,
then release. Scanning stops when the unit
tunes in a station.
Or
Press TUN -/+ repeatedly.
3. Adjust the volume by rotating VOL. on the unit
or by pressing VOLUME
W
/
S
on the remote
control repeatedly.
Presetting the Radio Stations
You can preset 50 stations for FM .
Before tuning, make sure to turn down the volume.
1. Press FUNCTION on the remote control or
FUNC. on the unit until FM appears in the
display window.
2. Select the desired frequency by pressing TUN
-/+.
3. Press PROGRAM/MEMO a preset number will
 ash in the display window.
4. Press PRESET/FOLDER
W
/
S
to select the
preset number you want.
5. Press PROGRAM/MEMO The station is stored.
6. Repeat steps 2 to 5 to store other stations.
7. To listen a preset station, press
PRESET/FOLDER
W
/
S
.
Deleting all the saved stations
1. Press and hold PROGRAM/MEMO for two
seconds. “ERASE ALL” will  ash up on the unit
display.
2. Press PROGRAM/MEMO to erase all saved radio
stations.
Improving poor FM reception
Press
d
/
M
on the remote control or
T
on the
unit. This will change the tuner from stereo to
mono and usually improve the reception.
Seeing information about a
Radio station
The FM tuner is supplied with the RDS (Radio Data
System) facility. This shows information about
the radio station being listened to. Press RDS
repeatedly to cycle through the various data
types. :
PS (Programme Service Name)
The name of the channel will appear in
the display
PTY (Programme Type Recognition)
The programme type (e.g. Jazz or News)
will appear in the display.
RT (Radio Text)
A text message contains special
information from the broadcast station.
This text may scroll across the display.
CT (Time controlled by the channel)
This shows the time and date as
broadcast by the station.
You can search the radio stations by programme
type by pressing RDS. The display will show the last
PTY in use. Press PTY one or more times to select
your preferred programme type. Press
C
/
V
on the remote control or
/
on the unit. The
tuner will search automatically. When a station is
found the search will stop.
XA146-D0P-ADEULL-ENG.indd 12XA146-D0P-ADEULL-ENG.indd 12 11. 12. 02  10:0511. 12. 02  10:05