Full Product Manual

27OPERATION
ENGLISH
Cycle Modier Buttons
Each cycle has default settings that are selected
automatically. Customize these settings using the
cycle modier buttons. Press the button for the
desired modier to toggle through the available
settings. The washer automatically adjusts the
water level for the type and size of wash load for
best results and maximum efciency. Due to the
high-efciency nature of this product, water levels
may be much lower than expected. This is normal
and cleaning/rinsing performance will not be
compromised.
Temp.
Temp. selects the wash and rinse temperature
combination for the selected cycle. Press the Temp.
button until the indicator light for the desired setting is
lit. All rinses use tap cold water .
Cold rinses use less energy. The actual cold rinse
temperature depends on the temperature of the cold
water at the faucet.
Your washer features a heating element to boost the
hot water temperature for Extra Hot settings. This
provides improved wash performance at normal
water heater settings.
• Select the water temperature suitable for the type
of load you are washing. Follow the garment fabric
care labels for best results.
Spin
Higher spin speeds extract more water from clothes,
reducing drying time and saving energy. Press the
Spin button until the desired speed is selected. Some
fabrics, such as delicates, require a slower spin
speed. To protect your clothing, not all spin speeds
are available for all cycles.
• The Spin button also activates the Drain+Spin cycle
to drain the tub and spin clothes; for example, if you
want to remove clothes before the cycle has ended.
To use Drain+Spin, press the Power button, then
press the Spin button repeatedly to select a spin
speed. Press the Start/Pause button to begin.
Soil
Adjusting the soil level setting will modify the cycle
times and/or wash actions. Press the Soil button until
the desired soil level is selected.
• This feature needs more time for heavily soiled
loads or less time for lightly soiled loads.
Dry
Use the your Automatic cycles to dry most loads.
Electronic sensors measure the temperature of the
exhaust to increase or decrease drying temperatures
for faster reaction time and tighter temperature
control.
• Cold water tap must be left on during drying cycles.
• This washing machine’s automatic process from
washing to drying can be selected easily.
• For most even drying, make sure all articles in the
clothes load are similar in material and thickness.
• Do not overload the washing machine by stufng
too many articles into the drum. Items must be able
to tumble freely.
• If you open the door and remove the load before the
washing machine has nished its cycle, remember
to press the Start/Pause button.
NOTE
• When you turn the washing machine off of the
drying cycle, the drying fan motor can be operated
to save itself for 1 minute.
• Be careful when removing your clothing from the
washing machine, as the clothing or washing
machine may be hot.