User manual
Table Of Contents
- Table of contents
- What you’ll find in the box
- GizmoPal parts and functions
- Charging the battery
- Turning your GizmoPal on and off
- Connecting your GizmoPal
- The GizmoPal app
- Caregivers and Approved contacts
- Adding a GizmoPal security PIN
- Using the GizmoPal
- Adding and removing Bands
- LED Colors and the GizmoPal Status
- Getting help
- Safety
- LIMITED WARRANTY STATEMENT
4
Charging the battery
Charging the battery
To ch a rge the b attery, open th e USB/Cha r ging por t cover a n d:
1. Plug the charging cord to the GizmoPal.
2. Plug the other end of the cord into the charging adapter
3. Plug the charging adapter into an electrical outlet.
(The light will blink red while the unit is charging then will be a solid
green once charging is complete. See page 21 for more info on GizmoPal
lights.)
USB/Charging
Port Cover
NOTE • Don’t use the GizmoPal while it’s being charged.
• Only use the charging cord and adapter included in the box to charge your GizmoPal.
• The light on the GizmoPal will be a steady green when the GizmoPal is fully charged.
• Make sure that you close the USB/Charging port cover completely to keep out dirt and
water.