User manual

9
Connection
Precaution
Before connecting, make sure that
ignition switch is set to OFF, and remove
the terminal of the battery to avoid
short circuits.
otes
• Make correct connections as illustrated
in the connection diagram.
• Never use the cord of each speaker
in common.
From antenna
From power amplifier’s input
jack ( 2 channel or 4 channel
Optional)
To the wiring of vehicle Colors
of leads
• BLUE/WHITE : This lead is for
connection to the power amplifier
(Remote on)
• ORANGE : This lead is for connection
to the Phone line.
• YELLOW : This lead is for connection
to the Battery (back-up) terminal from
which the power is always supplied.
• BLUE : This lead is for connection to
the full automatic power antenna.
Power antenna load to be connected to
the terminal of the control relay switch
for vehicles equipped with a power
antenna.
This lead is not used for vehicles with
manual or semiautomatic antennas.
• PINK : This lead is for connection to
the Dimmer line
• RED : This lead is for connection to the
terminal from which the power is
supplied when the ignition switch is set
to ACC.
• BLACK : This lead is for connection to
the Ground.
Connect the CD changer (optional)
• Your car receiver works as control unit
for a CD changer which you can buy, if
not yet done, later.
• The suitable cord shown on the
scheme will be provided together with
the CD changer.
2-Speaker Connections
4-Speaker Connections
D
C
B
A
L
FRONT
R
1
2
3
4
s
L
FRONT
REAR
R
L
R
1
234
5
678
s