User guide

Connecting12
Connecting
2
Connecting to
speakers
Attaching the speakers to the
unit
1. Loosen the knob by turning it counterclockwise.
2. Insert the bare part of the wire into the hole in
side of each terminal.
3. Tighten the knob by turning it clockwise to
secure the wire.
Connect the red stripe of each wire to the terminals
marked + (plus) and the other end to the terminals
marked - (minus).
The speakers contain magnet parts, so color
irregularity may occur on the TV screen or PC
monitor screen. Please use the speakers far
away from either TV screen or PC monitor.
>
Caution
System cable
Connection
Your unit consists of two separate parts, DVD
player/Tuner and Ampli er/power.
Before you can use your unit, the separate parts
must be connected with the system connection
cable.
CABLE
SPEAKERS
POWER IN
R
L
45
iPod DOCK
ANTENNA
CABLE
L
R
FM
HDMI OUT
AUX IN
Pr/Cr
Pb/Cb
Y
COMPONENT VIDEO OUT
(PROGRESSIVE SCAN)
VIDEO OUT
OPTICAL IN
To operate the unit normally, you should push
the system cable fully enough to let it reach
end of cable connector of the DVD Player.
,
Note
TB106-D0F-ADEULL-ENG.indd 12TB106-D0F-ADEULL-ENG.indd 12 11. 11. 30  2:1611. 11. 30  2:16