User guide

Operating14
Operating
3
Radio Operations
Be sure that FM aerial is connected.
(Refer to the page 12)
Listening to the radio
1. Press FUNCTION until FM appears in the display
window.
The last received station is tuned in.
2. Press and hold TUNING -/+ for about two
seconds until the frequency indication starts to
change, then release. Scanning stops when the
unit tunes in a station.
Or
Press TUNING -/+ repeatedly.
3. Adjust the volume by rotating VOLUME +/-
on the unit or by pressing VOLUME +/- on the
remote control repeatedly.
Presetting the Radio Stations
Youcanpreset50stationsforFM.
Before tuning, make sure to turn down the volume.
1. Press FUNCTION until FM appears in the display
window.
2. Select the desired frequency by pressing
TUNING -/+.
3. Press PROG./MEMO. a preset number will ash
in the display window.
4. PressPRESET/FOLDER
W/S
to select the
preset number you want.
5. Press PROG./MEMO. The station is stored.
6. Repeatsteps2to5tostoreotherstations.
7. To listen a preset station, press
PRESET/FOLDER
W/S
.
Deleting all the saved stations
1. Press and hold PROG./MEMO. for two seconds.
“ERASEALL”willashupontheunitdisplay.
2. Press PROG./MEMO. to erase all saved radio
stations.
Improving poor FM reception
Press
d
/
M
on the unit or
d
/
M
on the remote
control. This will change the tuner from stereo to
mono and usually improve the reception.