User guide
Table Of Contents
- LICENSE
- SAFETY INSTRUCTIONS
- PREPARATION
- REMOTE CONTROL
- USING THE PROJECTOR
- ENTERTAINMENT
- SMARTSHARE
- MAGICAL MIRRORING
- CUSTOMIZING SETTINGS
- CONNECTING DEVICES
- INTERACTIVE FUNCTION
- To Connect the Interactive Pen to the PC
- Using The Interactive Pen
- Interactive Pen and Button
- Using the Interactive Pen Button
- To Charge the Interactive Pen
- Description of LED Interactive Pen Indicators
- To Replace the Pen tip
- How to Use the Strap
- To Clean Interactive Pen
- Operating Range with Interactive Pen
- To Use the Interactive Pen Functions
- Troubleshooting the Interactive Pen Function
- SERIAL COMMUNICATION FUNCTION
- MAINTENANCE
- WIRELESS SPECIFICATIONS
- SPECIFICATIONS
87
SERIAL COMMUNICATION FUNCTION
06. Color (Command: ki)
► Adjusts the color.
Disabled when the Black mode is selected.
Transmission [k][i][][Set ID][][Data][Cr]
Data Min: 0H - Max: 64H
(* Transmitted in hexadecimal code)
* See the data structure.
Ack [i][][Set ID][][OK][Data][x]
Data Min: 0H - Max: 64H
07. Tint (Command: kj)
► Adjusts the tint.
Disabled when the Black mode is selected.
Transmission [k][j][][Set ID][][Data]
[Cr]
Data Red: 0H - Green: 64H
(* Transmitted in hexadecimal code)
* See the data structure.
Ack [j][][Set ID][][OK][Data][x]
Data Red: 0H - Green: 64H
08. Sharpness (Command: kk)
► Adjusts the sharpness.
Disabled when the Black mode is selected.
Transmission [k][k][][Set ID][][Data][Cr]
Data Min: 0H - Max: 32H
(* Transmitted in hexadecimal code)
* See the data structure.
Ack [k][][Set ID][][OK][Data][x]
Data Min: 0H - Max: 32H
09. OSD Select (Command: kl)
► Selects OSD On/Off.
Transmission [k][l][][Set ID][][Data][Cr]
Data 00:
OSD selection mode off
01:
OSD selection mode on
Ack [l][][Set ID][][OK][Data][x]
Data 00:
OSD selection mode off
01:
OSD selection mode on
10. Key Lock (Command: km)
► To Set the function of locking the remote con-
trol and front panel control on the projector.
Transmission [k][m][][Set ID][][Data][Cr]
Data 00:
Lock Off
01:
Lock On
Ack [m][] [Set ID][][OK][Data][x]
Data 00:
Lock Off
01:
Lock On
* This function is congured when the keys on the
remote control or control panel are not used. If
the unit is fully discharged after its power plug is
pulled out of a wall outlet, the LOCK function is
cleared.
* If the unit is in the key lock standby mode, the
projector will not respond to the power button on
the remote control or control panel.
11. Color Temperature (Command: ku)
► Adjusts the color temperature.
Disabled when the Black mode is selected.
Transmission [k][u][][Set ID][][Data][Cr]
Data 00:
Medium
01:
Cool
02:
Warm
04:
Natural
(* Transmitted in hexadecimal code)
* Data 03 is not used.
Ack [u][][Set ID][][OK][Data][x]
Data 00:
Medium
01:
Cool
02:
Warm
04:
Natural