User guide

80
INTERACTIVE FUNCTION
(For SA565 only)
To Use the Interactive Pen Functions
y
Make sure that the Computer/Laptop screen is displayed on the projector screen.
Ͱ
OPTION
• Caption
• Set ID
• PJT mode
• KeyStone
• Blank Image
• Auto Power
• Interactive
Interactive
Single Pen
Channel
Auto
• Set Channel 0
Pen Setting
• Pairing Mode Open
Close
1 Press the MENU button.
2 Select OPTION using the , ,
, and buttons, and press the OK
button.
3 Select Interactive using the , , ,
and buttons, and press the OK button.
- To return to the previous screen,
press the ꕣ button.
4 Select which item you want using the
, , , and buttons, and press
the OK button.
- After the settings have been
changed, press the Close button to
close the window.
The interactive function settings are as follows:
Item Description
Interactive There are four function modes: Off, Single, Double Pen, or Multi Touch.
y
Off: Disables the interactive pen function.
y
Single Pen: Use one interactive pen.
y
Double Pen: Use two interactive pens at the same time.
(It is recommended to install the WizTeach program
provided on your PC prior to use.)
y
Multi Touch: Use the Multi Touch function with two interactive pens.
The Multi Touch function does not work on any PC,
operating system or program that does not support it.
channel You can select a channel in Auto or Manual mode.
y
Auto: A channel is automatically selected.
y
Manual: Select a channel manually.
Set Channel A maximum of 29 channels (0 - 28) are available.
Pairing
Mode
Set the Pairing mode to either Open or Fixed.
y
Open: Follow the on-screen instructions to set the interactive pen to
Open mode.(While the interactive pen is pointing at a screen,
the pen can be used with any projector.)
y
Fixed: Follow the on-screen instructions to set the interactive pen to
Fixed mode. (The interactive pen can be used only with a
paired projector.)
- Up to 10 pens can be paired to one projector.