User guide
Table Of Contents
- LICENSE
- SAFETY INSTRUCTIONS
- PREPARATION
- REMOTE CONTROL
- USING THE PROJECTOR
- ENTERTAINMENT
- SMARTSHARE
- MAGICAL MIRRORING
- CUSTOMIZING SETTINGS
- CONNECTING DEVICES
- INTERACTIVE FUNCTION
- To Connect the Interactive Pen to the PC
- Using The Interactive Pen
- Interactive Pen and Button
- Using the Interactive Pen Button
- To Charge the Interactive Pen
- Description of LED Interactive Pen Indicators
- To Replace the Pen tip
- How to Use the Strap
- To Clean Interactive Pen
- Operating Range with Interactive Pen
- To Use the Interactive Pen Functions
- Troubleshooting the Interactive Pen Function
- SERIAL COMMUNICATION FUNCTION
- MAINTENANCE
- WIRELESS SPECIFICATIONS
- SPECIFICATIONS
78
INTERACTIVE FUNCTION
(For SA565 only)
To Replace the Pen tip
When the pen tip is worn out, replace it as shown in the gure below.
Turn the pen tip to the right to
remove it from the interactive
pen, as shown in the figure
below.
Turn the pen tip to the left to
install it onto the interactive
pen, as shown in the figure
below.
Open Close
How to Use the Strap
Use the strap to prevent dropping the interactive pen. Use the pen safely so as not to cause
injury or damage to nearby objects.
CAUTION
y
Be sure to wear the strap on your wrist when using the interactive pen.
y
Store the interactive pen in the hard case.
To Clean Interactive Pen
If the lens of the interactive pen does not work properly, clean it as shown in the picture below.
CAUTION
y
If there are foreign objects or dust on the lens at the tip of the interactive pen,
gently wipe with a cotton swab.
y
Foreign objects or dust on the lens surface may cause malfunction of the
interactive pen.