User guide
Table Of Contents
- LICENSE
- SAFETY INSTRUCTIONS
- PREPARATION
- REMOTE CONTROL
- USING THE PROJECTOR
- ENTERTAINMENT
- SMARTSHARE
- MAGICAL MIRRORING
- CUSTOMIZING SETTINGS
- CONNECTING DEVICES
- INTERACTIVE FUNCTION
- To Connect the Interactive Pen to the PC
- Using The Interactive Pen
- Interactive Pen and Button
- Using the Interactive Pen Button
- To Charge the Interactive Pen
- Description of LED Interactive Pen Indicators
- To Replace the Pen tip
- How to Use the Strap
- To Clean Interactive Pen
- Operating Range with Interactive Pen
- To Use the Interactive Pen Functions
- Troubleshooting the Interactive Pen Function
- SERIAL COMMUNICATION FUNCTION
- MAINTENANCE
- WIRELESS SPECIFICATIONS
- SPECIFICATIONS
75
INTERACTIVE FUNCTION
Using the Interactive Pen Button
Function Description
Left Mouse Click
Press the button or push the Pen tip.
Right Mouse Click
Press the button.
Enter Fixed mode
Go to Interactive and set Pairing Mode to Fixed. Then,
press and hold the button more than three seconds within
ten seconds.
Enter Open mode
Press both the pen's button and button simultaneously
for 3 seconds.
Wake Up
Press any one of the button, button, or button.
Or, push the pen tip.
y
Make sure that the interactive pen is not pointing toward the screen when entering
each mode.
y
If the interactive pen is not used for more than 30 seconds and is not pointing
toward the screen, it will automatically enter Energy Saving mode.
y
The projector operates in Open mode by default, while Fixed mode is only used
for pairing the pen with the projector. The projector automatically returns to Open
mode from Fixed mode after 10 seconds regardless of whether the pairing is
successful or not.
(For SA565 only)