User guide
Table Of Contents
- LICENSE
- SAFETY INSTRUCTIONS
- PREPARATION
- REMOTE CONTROL
- USING THE PROJECTOR
- ENTERTAINMENT
- SMARTSHARE
- MAGICAL MIRRORING
- CUSTOMIZING SETTINGS
- CONNECTING DEVICES
- INTERACTIVE FUNCTION
- To Connect the Interactive Pen to the PC
- Using The Interactive Pen
- Interactive Pen and Button
- Using the Interactive Pen Button
- To Charge the Interactive Pen
- Description of LED Interactive Pen Indicators
- To Replace the Pen tip
- How to Use the Strap
- To Clean Interactive Pen
- Operating Range with Interactive Pen
- To Use the Interactive Pen Functions
- Troubleshooting the Interactive Pen Function
- SERIAL COMMUNICATION FUNCTION
- MAINTENANCE
- WIRELESS SPECIFICATIONS
- SPECIFICATIONS
61
CUSTOMIZING SETTINGS
OPTION Settings
1 Press the MENU button.
2 Use the , , or button to select OPTION
and press the OK button.
3 Use the , , or button to set up the
desired item and press the OK button.
- To return to the previous menu, press
the ꕣ button.
The available option settings are described below.
Item Description
Language Selects the desired language.
Caption If the language for the AV input is set to Korean, captions can be
turned on or off.
Set ID Sets the unique number of a projector when it is being remotely
controlled by PC.
PJT Mode Turns the projected image upside down or ips it horizontally.
Keystone Compensates for the trapezoidal image shape created when projecting
an image from an angle not perpendicular to the screen.
Blank Image Selects the background for blank image.
Auto Power Makes the projector turn on automatically when the power cord is con-
nected.
Item
On When the power cord is connected to the projector, it turns
on automatically.
Off When the power cord is connected to the projector, it goes
into standby mode.
Interactive Sets the Interactive mode. (For SA565)
y
Operate only in RGB/HDMI input mode.
y
Only Full Screen, 16:9 and 4:3 are available for Aspect Ratio when
the Interactive function is enabled.
y
If you enable the Interactive function when Aspect Ratio is set to
either Just Scan, Set By Program, Zoom or Cinema Zoom, Aspect
Ratio will be changed to Full Screen.
High
Altitude
If the projector is used at an altitude higher than 1,200 meters, turn this
option on. When High Altitude is not enabled, the projector may over-
heat or its protection function may be activated. If this happens, turn
the projector off and then on again after waiting for several minutes.
?
OPTION
︿
• Language
• Caption : Off
• Set ID : 1
• PJT Mode : Front
• KeyStone 1
- +
• Blank Image : Blue
• Auto Power : Off
﹀