User guide
Table Of Contents
- LICENSE
- SAFETY INSTRUCTIONS
- PREPARATION
- REMOTE CONTROL
- USING THE PROJECTOR
- ENTERTAINMENT
- SMARTSHARE
- MAGICAL MIRRORING
- CUSTOMIZING SETTINGS
- CONNECTING DEVICES
- INTERACTIVE FUNCTION
- To Connect the Interactive Pen to the PC
- Using The Interactive Pen
- Interactive Pen and Button
- Using the Interactive Pen Button
- To Charge the Interactive Pen
- Description of LED Interactive Pen Indicators
- To Replace the Pen tip
- How to Use the Strap
- To Clean Interactive Pen
- Operating Range with Interactive Pen
- To Use the Interactive Pen Functions
- Troubleshooting the Interactive Pen Function
- SERIAL COMMUNICATION FUNCTION
- MAINTENANCE
- WIRELESS SPECIFICATIONS
- SPECIFICATIONS
32
ENTERTAINMENT
Tips for Network Settings
y
Modem reconfiguration may cause
network connection problems. If
it does, turn off the modem and
disconnect it from the projector; then
turn on the modem again.
y
LG Electronics is not responsible for
any Internet connection problems, or
any failure, error or malfunction due
to your Internet connection.
y
The network connection may not
be working properly because of the
Internet Service Provider (ISP).
y
DSL service requires a DSL modem,
and cable service requires a cable
modem. Internet connections may be
limited due to an agreement with an
Internet service provider (ISP), and
the projector might not connect to a
network. (When only one device is
allowed per line, if a PC is already
connected, other devices are not
available for use.)
y
The wireless network may be affected
by interference from a device that
uses 2.4 GHz frequency, such as
a wireless telephone, Bluetooth
device or microwave. Interference
may also be caused by a device that
uses 5 GHz frequency such as Wi-Fi
devices.
y
The wireless network service may
run slowly depending on surrounding
wireless environment.
y
Some devices may have a network
traffic jam if any of local home
networks is turned on.
y
To connect to a wireless router,
a router that supports wireless
connection is necessary; the
wireless connection function of the
corresponding router must also be
activated. Ask the router manufacturer
whether the router supports wireless
connection.
y
To connect to a wireless router, verify
the SSID and security settings of
the wireless router. Please refer to
the user guide of the corresponding
router regarding SSID and security
settings of the wireless router.
y
The projector may not work properly if
network devices (wire/wireless router
or hub, etc.) are incorrectly set up. Be
sure to install the devices correctly by
referring to their user guides before
configuring network connection.
y
When Ad-hoc is used, it may not be
able to connect depending on the
device (for example, laptop) that is
connected.
y
The connection method may vary
according to the manufacturer of the
wireless router.