User guide
Table Of Contents
- LICENSE
- SAFETY INSTRUCTIONS
- PREPARATION
- REMOTE CONTROL
- USING THE PROJECTOR
- ENTERTAINMENT
- SMARTSHARE
- MAGICAL MIRRORING
- CUSTOMIZING SETTINGS
- CONNECTING DEVICES
- INTERACTIVE FUNCTION
- To Connect the Interactive Pen to the PC
- Using The Interactive Pen
- Interactive Pen and Button
- Using the Interactive Pen Button
- To Charge the Interactive Pen
- Description of LED Interactive Pen Indicators
- To Replace the Pen tip
- How to Use the Strap
- To Clean Interactive Pen
- Operating Range with Interactive Pen
- To Use the Interactive Pen Functions
- Troubleshooting the Interactive Pen Function
- SERIAL COMMUNICATION FUNCTION
- MAINTENANCE
- WIRELESS SPECIFICATIONS
- SPECIFICATIONS
21
PREPARATION
Projection Distance per Screen Size
1 Place the projector on a sturdy, level surface, together with the PC or audio/video
source.
2 Place the projector an appropriate distance away from the screen. The distance
between the projector and the screen determines the actual size of the image.
3 Position the projector so that the lens is at a right angle to the screen. If the projector
is not at a right angle, the projected image will look distorted.
To correct the distortion, use the Keystone function.
4 Connect the power cord of the projector and the connected device to the wall outlet.
Ratio of upward projection : 128 %
A
B
C
D
E
Screen
(Unit: mm)
16:10 Ratio
1778 2032 2286 2540 2794
1580 x 942 1723 x 1077 1939 x 1212 2154 x 1346 2369 x 1481
A 497 562 627 691 756
B 452 517 582 646 711
C 29 94 159 223 288
D 349 386 423 460 497
E 196 233 270 307 344
ARC
(Width x
Height)