User guide

System Setting
32
System Setting
3
All the downloaded videos from DivX VOD
with this player’s registration code can only be
played back on this unit.
,
Note
Auto Off
The screen saver appears when you leave the unit
in Stop mode for about ve minutes. If you set this
option to [On], the unit automatically turns itself o
after the Screen Saver is displayed for 20 minutes.
Set this option to [O ] to leave the screen saver
until the unit is operated by the user.
Country
All channel information will change according to
your country selection.
Refer to pages 21 for more information.
Disability Assistance
Hard Of Hearing
Hard of hearing for users who are hearing impaired
If you set [On] and there is hard of hearing subtitle,
You can see the subtitle on screen.
Audio Description
Audio description for users who are visually
handicapped. If you set [On], You can hear the
explanation of display through a Main audio and
Audio Description audio.
Internal HDD Format
Everything recorded on the HDD will be erased.
1. Press HOME (
n
).
2. Use
w/s/a/d
to select [Setting] in the
[Home] menu, and press ENTER (
b
).
3. Use
w/s
to select [OPTION] and press ENTER
(
b
).
4. Use
w/s/a/d
to select [Internal HDD
Format], and press ENTER (
b
).
Select [No] and press ENTER to cancel.
5. Use
a/d
to select [Yes], and press ENTER (
b
)
to start the HDD format. Select [OK] and press
ENTER (
b
) to return to the previous step.
Factory Reset
You can reset the recorder to its original factory
settings.
[Factory Reset] If you need to, you can reset the
recorder to all its factory settings. Select [Factory
Reset] icon then press ENTER (
b
) and auto setup
menu will appear, see page 21.
1. Select [Factory Reset] option then press
d
.
2. Press ENTER (
b
) and then confirm message will
appear.
3. Use
a/d
to select [Yes] and then press ENTER
(
b
) to reboot the recorder.