User guide

System Setting
29
System Setting
3
[DTV] Menu
Auto Tuning
This option scans a programme and sets the
available programmes. Refer to pages 23-24 for
more information.
Manual Tuning
Scans digital TV or radio programmes and adds the
found programmes to the programme list. Refer to
page 24 for more information.
Channel Edit
This option allows you to edit the TV or Radio
programmes. Refer to page 25 for more information.
Antenna 5V
If you are using an indoor antenna, use one with
a signal amplier rated at DC 5V, 100 mA and set
this option to [On]. Refer to page 26 for more
information.
Timeshift
Set this option to [Auto] to use the Time Shift
function automatically without pressing TIME SHIFT
button. The timeshift will start after TV viewing is
started. Refer to page 26 for more information.
CI Information
You can enjoy not only scramble services using the
Conditional Access Module (CAM), but also Free-
To-Air services. Dierent CAM supports dierent
encryption system. Contact your service provider
or distributor to obtain the right kind of CAM. Only
Free-To-Air services are available without CAM.
This option displays a menu of CI card functions.
Consult your service provider for more information
on the functions available. You must obtain a “CI or
CI+ CAM” from your service provider.
CI Operator Profile Mode
In case of On it shows a channel list that is oered
by CAM operator.
Default Recording Device
This option sets the storage where your TV
recording will be stored.
1. Display [Setting] menu.
2. Use
w/s
to select [DTV], and press ENTER (
b
).
3. Use
w/s
to select [Default Recording Device]
and press ENTER (
b
).
4. Select an option between [HDD] or [USB].
y
Even though [USB] is selected TV recording
will be stored on internal HDD, if there is not
proper external storage.
y
Additionally default Rec.List storage is also
applied by this menu option.
,
Note