OWNER’S MANUAL Wall Mounting Bracket Please read this manual carefully before installation and retain it for future reference. PSW400B PSW400BG PSW600B PSW600BG P/NO : MFL63640505 (1003-REV00) www.lg.
* 1 Year Warranty If material or workmanship proves defective under normal use, during the warranty period, please contact the retailer where you purchased it. This warranty is good only to the original purchaser of the product and effective only in the local area.
Install the product according to the directions in the user manual. If the product is not installed based on the directions in the user manual, it can cause a serious injury or damage to the product. During the installation, check the type of wall material and use the sealed anchor and screw if the conditions comply. If you do not use the designated anchor or screw, the mount may not be able to withstand the weight of the product and cause a safety issue.
2 How to attach to masonry walls - Use the anchors for wall material of concrete, light concrete, strong natural stone, soft natural stone masonry brick and hallow block that do not crack. Please follow the below direction. - Check the material of the wall and the thickness of the finishing. - When installing the product on the wooden wall, refer to page 5.
- For PSW600B / PSW600BG models, remove the height adjusting screws before installing the wall mount, and then assemble the extended bracket. Use the removed screws to install the extended bracket. - Before installing the wall mount, secure the 4 bracket fixing screws on the upper left and right sides respectively and 4 on the lower left and right sides respectively. (Use a hand or electric cross-head screwdriver.
5 How to level the Display ± 10mm (horizontal adjustment) Turn the screw clockwise to move the set up and turn the screw counterclockwise to move the set down. Use the supplied two leveling screws (M5 x 25 mm) to adjust the tilt of the wall mount. Cable arrangement and set protection cushion 6 - Arrange the cables as shown in the picture. Use some type of cable banding device to hold all the cables together.
[ Unit : mm ] < PSW600B/PSW600BG> 973 933 14 14 20
The model and serial number of the product is located on the back or one side of the product. Record it below should you ever need service. MODEL SERIAL Supported Displays: (Consult the retailer for detail list of models.
