Visit us at : http://www.lgservice.com Owner's & Installation Manual ESPAÑOL Models: PQRCUDS0 PQRCUDS0B PQRCUDS0S ITALIANO LG Deluxe Wired Remote Controller ENGLISH LG FRANÇAIS DEUTSCH IMPORTANT êìëëäàâ • Please read this installation manual completely before installing the product. • Installation work must be performed in accordance with the national wiring standards by authorized personnel only. • Please retain this installation manual for future reference after reading it thoroughly.
Deluxe Wired Remote Controller Owner’s & Installation Manual TABLE OF CONTENTS ■ Safety Precautions ............................................................3~4 ■ Part Description.................................................................5~6 ■ Wired remote controller switch information .......................7 ■ Installation Method................................................................8 ■ Necessary functions before using ................................9~11 • Trial Operation..............
Safety Precautions Safety Precautions • The installation requires expert skills, and it should be installed by the service center or other shops specialized in the installation and recognized by our company. • The following safety cautions are provided to prevent unexpected dangers or losses. WARNING : If the user does not follow the mandatory items, it may result in serious injury or death. CAUTION : If the user does not follow the mandatory items, it may cause personal injury or property damage.
Safety Precautions ■ In-use Do not modify or lengthen the power cable at your discretion. It may cause fire or an electric shock. Do not place a heating device near the product. It may cause fire. Do not drop water on to the product. It may cause an electric shock or product breakdown. Do not place something heavy on the power cable. It may cause fire or an electric shock. Do not place a heavy thing on the product. It may cause product breakdown.
Part Description Part Description 2. LCD Screen 3. Connecting Cable and Connector Accessory Connecting Cable (1EA) Fixing Screw (2EA) User / Installation Manual Installation Paper Owner’s & Installation Manual 5 ENGLISH 1.
Part Description Deluxe Wired Remote Controller 11 1 12 2 3 4 5 6 7 8 9 10 13 14 15 16 17 18 19 20 1. Operation Display Panel 12. On / Off Button 2. Room Temperature Button 13. Special Function Button 3. Fan Speed Button 14. Dehumidification / Heater Button 4. Fan / Plasma / Swirl Swing Button 15. Sub Function Button 5. Automatic / Vane Control Button 16. Easy Reservation Button 6. Timer Mode Button 17. Cancel Button 7. Date Selection Button 18. Heating / Ventilation Button 8.
Wired remote controller switch information Wired remote controller switch information Product selection switch 1. Cooling ONLY product 2. HEAT PUMP product S/W Indoor temperature sensor selection switch 1. Use the temperature sensor on the remote controller 2. Use the temperature sensor on the product. 3.
Installation Method Installation Method 1 Put the installation paper on the place and determine the position and height of the fixing screws of the wired remote controller. • Refer to the printed side of the installation paper. The position of the fixing screws Side of remote Controller 3 CN-DISP IC01A LO1K J14 C01K LO1D C07D CN-M C CN-ZONE Main frame J15 • The product is being shipped with the cable connected only to the remote controller.
Necessary function before using Necessary functions before using The trial operation is to check the installation status of the product. The temperature will not be controlled during trial operation. Instead the product will operate in several modes such as cooling, strong wind, comp-on. 1 The trial operation is to check the installation status of the product. The temperature will not be controlled. Instead the product will operate in several modes such as cooling, strong wind, comp-on.
Necessary function before using Setting the Central-Control Address 1 Press the Special Function button. 2 Press the address setting button. Press the temperature-increasing button to change the group number. Press the temperature-decreasing button to change the indoor unit number. The number of the central control address group is "2." And the number of the indoor unit is "5." 3 If you press the address setting button, the addressing setting mode will be unset.
Necessary function before using ESP Function 100 unit 10 unit 1 Press the Special Function button. 2 Press the E.S.P button. 3 Set the volume of each air flow (Low, Medium, Hi) by using the temperature control button. Press the air flow button to select the air flow. (The value of E.S.P could be adjusted from 1 to 225.) (The figure on the left shows when the strong wind’s ESP value has been set to 212.) 4 If you press the E.S.P button one more time, the E.S.
How to use the Mode Selection Button How to use the Mode Selection Button Cooling Operation 1 Cooling operation will begin if you press the On/Off button. 2 Press the temperature button and set the expected temperature lower than the current room temperature. (18~30°C) A click of the button will increase the expected temperature by 1°C A click of the button will decrease the expected temperature by 1°C.
How to use the Mode Selection Button Heating Operation Press the heating button after pressing the On/Off button of the remote controller. 2 Set the expected room temperature higher than the current room temperature. (16~30°C) A click of the button will increase the desired temperature by 1°C. A click of the button will decrease the desired temperature by 1°C.
How to use the Mode Selection Button Auto-Operation 1 Press the On/Off button and then press the Automatic Operation button. 2 When the room temperature is lower than the expected temperature: Heating Operation. When the room temperature is higher than the expected temperature: Cooling temperature. 3 Press the operation selection button and choose one of the functions among blowing, automation, heating, and dehumidification if you want another operation mode during the operation.
How to use the Mode Selection Button Dehumidification Operation Dehumidification Operation: Dehumidification by lowering temperature slightly Press the On/Off button on the remote controller. 2 Select the dehumidification function by pressing the Mode selection button.
How to use the Mode Selection Button Fan Speed Selection You can easily control the fan speed. 1 Select the proper fan speed which you want by pressing the fan speed button on the remote controller. • If you press the fan speed button, the strength of the fan speed will change in the order of Low → Medium Hi → Power. • If the product is not compatible with the fan speed control, it will not function as your selection.
Sub Function Sub Function Auto Swing 1 Press the Sub function button on the remote controller. 2 Press the automatic Auto Swing button. 3 A click of Auto Swing button will turn on/off the indicator. * If the product is not compatible with the automatic wind direction mode, it will not operate automatically. Owner’s & Installation Manual 17 ENGLISH You can control the wind direction easily.
Sub Function Plasma You can use the plasma function. 1 Press the Sub function button. 2 Press the Plasma button. • A click of the Plasma button will turn on/off the indicator. • If the product is not compatible with the Plasma function, it will not do the Plasma function even though the indicator is turned on. • Plasma Function is possible when only product is operating. • Please press the Plasma button in Fan Mode, If you want to operate only plasma function.
Sub Function Heater You can use the heater function. Press the Sub function button. 2 Press the heater button. • A click of the heater button will turn on/off the indicator. • If the product is not compatible with the heating function, it will not do the heating function.
Special Function Special Function This is a function to prevent tampering of settings by children or others. Child Lock You can use the child lock function. 1 Press the Special Function button of the remote controller. 2 Press the child lock button. • A click of the child lock button will turn on/off the indicator. • If you press another button while adjusting child lock function, the temperature display will show CL for three seconds and then the operation will come back to the original mode.
Special Function Vane control You can control the angle of the vane. Select the Advanced Selection button on the control panel of the remote controller. 2 Press the Vane Control button. Press the Vane Control button one more time to control the top and bottom vane. 3 You will see the screen shown on the left. 4 Press the Temperature Adjustment button to adjust the two vane angles from P0 to P5. 5 Press the Vane Control button one more time to control the remaining two vane angles.
Special Function Swirl Swing You can use the swirl swing. 1 Press the Special Function button of the remote controller. 2 Press the swirl swing button. • A click of the swirl swing will turn on/off the indicator. • If the product is not compatible with the swirl swing function, it will not do the function even though the indicator is turned on. Room Temperature Display 1 If you press indoor temperature button on the remote controller, the indoor temperature displays for 5 seconds.
Special Function Easy Reservation Press Timer mode button on the remote controller. 2 3 Press easy reservation button. You can change the values by pressing the temperature control buttons. Choose a desired reservation time.
Special Function Setting the current time 24 Deluxe Wired Remote Controller 1 You can set the current time by pressing the time display. When the time display is selected, a window for date and time setting shows up. 2 Press the date selection button. If you press the date selection button, the day of the week will flash. Then you can choose the proper day in the order of Monday, Tuesday, Wednesday, Thursday, Friday, Saturday, and Sunday.
Special Function Weekday reservation 1 Press the Reservation Mode button on the control panel of the remote controller. 2 Select the day of week to set using the Day Selection button. 3 After selecting the day of week, select the time to turn on the air conditioner using the Time/Minute button. Press the Time/Minute button one more time to set the minute using the Temperature Adjustment button and press the set button.
Different Mode Operation When One outdoor unit have several indoor units,Different Mode Operation is which each indoor unit operate different mode.
P/No.: 3828A20561C Printed in Korea After reading this manual, keep it in a place easily accessible to the user for future reference.
