LG Models: PQRCFCS0C ESPAÑOL Owner's & Installation Manual ITALIANO LG Simple Wired Remote Controller ENGLISH Visit us at : http://www.lgservice.com FRANÇAIS DEUTSCH P/No.: 3828A20860W êìëëäàâ üáõä • Please read this installation manual completely before installing the product. • Installation work must be performed in accordance with the national wiring standards by authorized personnel only. • Please retain this installation manual for future reference after reading it thoroughly.
Simple Wired Remote Controller Ownerʼs & Installation Manual TABLE OF CONTENTS n Safety Precautions..............................................................3~4 n Part Description ......................................................................5 n Wired remote controller switch information.........................6 n Installation Method .................................................................7 n Necessary functions before using .................................9~12 • Trial Operation ....
Safety Precautions Safety Precautions • For all the problems arising after installation by someone who has no relevant qualifications, LG will not provide free service. • The following safety cautions are provided to prevent unexpected dangers or losses. WARNING : If the user does not follow the mandatory items, it may result in serious injury or death. CAUTION : If the user does not follow the mandatory items, it may cause personal injury or property damage.
Safety Precautions n In-use Do not modify or lengthen the power cable at your discretion. It may cause fire or an electric shock. Do not place a heating device near the product. It may cause fire. Do not drop water on to the product. It may cause an electric shock or product breakdown. Do not place something heavy on the power cable. It may cause fire or an electric shock. Do not place a heavy thing on the product. It may cause product breakdown.
Part Description Part Description Simple Wired Remote Controller Defrost Preheat Out door Slo Lo Med Hi Room Temp 1 3. Fan Speed Button °C °F Po 4. Temperature Control Button Cooling Heating Auto Dry Fan 2 TEMP ROOM TEMP 2. On/Off Function Total on Central Run 3 4 FAN SPEED 5. Room Temperature Check Button TEMP 5 Each function will be shown on the display panel for three second or so when the power is applide at first.
Wired remote controller switch information Wired remote controller switch information Group Control Group control switch SWGR 1. For individual control/Master use 2. For group control/Slave use 2 1 Ceiling height selection switch Ceiling Height/Default E.S.P SWHI 3 2 1 Select Product 1. Low ceiling 2. Standard ceiling 3. High ceiling Product selection switch 1. Cooling Only product 2. Heat Pump product SWPD 2 1 Room Temp. Sensing Indoor temperature sensor selection switch 1.
Installation Method Installation Method Put the installation paper on the place and determine the position and height of the fixing screws of the wired remote controller. • Refer to the printed side of the installation paper. ENGLISH 1 The position of the fixing screws Main indoor unit LO1D C07D J14 C01K J15 3 CN-REMO Side of remote Controller LO1K • The product is being shipped with the cable connected only to the remote controller. Fix the connecting cable with the cable rack.
Installation instruction Group control 1. When installing more than 2 units of air conditioner to one wired remote controller, please connect as the right figure. • If it is not event communication indoor unit, set the unit as slave. • Check for event communication through the product manual. • Refer to regarding page on how to set the slave.
Necessary functions before using Necessary functions before using The trial operation is to check the installation status of the product. The temperature will not be controlled during trial operation. Instead the product will operate in several modes such as cooling, strong wind, comp-on. 1 If you want to set the trial operation mode, press the Room Temperature button and the fan speed button same time for three seconds.
Necessary functions before using Celsius/Fahrenheit Switching 1 If you want to change the temperature unit as the Celsius or Fahrenheit, press the Temperature control button(▼ ) and the Fan speed button same time for three seconds to enter the setting Mode. 2 Press the temperature control button to change the unit. Ex) Setting unit as Fahrenheit.
Necessary functions before using ENGLISH Setting the Central-Control Address Please set the address while using the central controller. You don't need to set address if you don't use central controller. 1 If you want to set the address on the display panle, press both temperature control buttons (s/t) same time for three seconds. 2 Press the temperature-increasing button to change the group number. Press the temperature-decreasing button to change the indoor unit number. e.g.
Necessary functions before using ESP Function E.S.P function is setting the volume of each fan speed. It is for the convenience of installation. It is recommended that you should not use this function while using the remote controller. PQRCFCS0C Defrost Preheat Out door Room Temp 1 Press the room temperature button and temperature incrreasing button s same time for three seconds 2 Set the volume of each fan speed(Low, Medium, Hi) by using the temperature control button.
How to use the Mode Selection Button How to use the Mode Selection Button 1 If you want to start the cooling operation, press the On/Off button. The cooling mode can be set from Central Controller only. 2 Press the temperature button and set the desired temperature lower than the current room temperature. (18~30°C) PQRCFCS0C Defrost Preheat Out door TEMP A click of the button will increase the desired temperature by 1°C or 2°F.
How to use the Mode Selection Button Heating Operation 1 If you want to start the heating operation, press the On/Off button. The heating mode can be set from Central Controller only. 2 Set the desired room temperature higher than the current room temperature. (16~30°C) PQRCFCS0C Defrost Preheat Out door TEMP A click of the button will increase the desired temperature by 1°C or 2°F. Room Temp Total on TEMP Central Run A click of the button will decrease the desired temperature by 1°C or 2°F.
How to use the Mode Selection Button 1 Set the operation mode to auto-operation by central controller after pressing the On/Off button.
How to use the Mode Selection Button Dry(Dehumidification) Operation Dry(Dehumidification) by lowering temperature slightly 1 If you want to start the dry operation, press On/Off button. The dry operation can be set from Central Controller only. 2 When the dry operation is selected, “dh” will be shown on the display panel as shown on the left side. 3 If it is used during rainy season or high humidity, you can have both effective dehumidifying and air conditioning effect.
How to use the Mode Selection Button Fan Speed Selection 1 Select the proper fan speed which you want by pressing the fan speed button on the remote controller. • If you press the fan speed button, the fan speed will change in the order of Low>Medium>Hi>Power. • The initial fan speed is "Hi" • If the product is not compatible with the fan speed control, it will not function as per your selection.
How to use the Mode Selection Button Indoor Temperature Display 1 Q PQRCFCS0C Defrost Room Temp" TEMP ROOM" TEMP FAN" SPEED TEMP 18 Simple Wired Remote Controller When the room temperature button is pressed on the remote controller, the indoor temperature will be displayed for about 5 seconds, then goes back to the previous screen.
How to use the Mode Selection Button This is a function to prevent tampering of settings by children or others. 1 You can use the child lock function by pressing both temperature increasing button and fan speed button for three seconds. In the initial setting of the child lock function, "CL" will be displayed on the display panel and then it will come back to the original mode.
Memo 20 Simple Wired Remote Controller
