User manual

Installation/User’s manual
ENGLISH
3-72
3. AC Manager Operation
Auto-change over operation, temperature limit operation Tab
Auto-change over operation tab is as follows;
- Standard temperature : Current standard temperature. The measurement method of the indoor
temperature is as below table.
- Temperature difference : The temperature width that can change current temperature.
3
The indoor unit being operated in the group operates auto-change over
operation function at the average temp of the detected temperature.
Auto-change over operation function is operated based on the fastest searched
indoor unit among the indoor units being operated within the group.
Auto-change over operation function is operated depending on the detected
temp based on the firstly registered indoor unit in the group.
Item Description
Average
Operation
Fixed
Enable Use auto-change over operation function in currently specified group.
Disable Not use auto-change over operation function in currently specified group.
Item Description
Temperature limit operation tab is as below.
Max and Min temperature can be set. Whether the pleasant control of comfort group is applied or not
is divided into applied and not applied.
After setting, click Set button and click Send button.