User manual

AC Manager

3-63

3. AC Manager Operation

History data display

A window displaying history data. The history of the devices connected to air conditioner, ventilation

and external input port can be displayed separately. By selecting AC, VENT and ETC on the left top of

the display window, the device history is displayed.

- AC : Data on air conditioner, indicating the information on date, time, address, mode, wind strength,

lock, temperature, operation, error and controller.

- VENT : Data on ventilation device, indicating the information on date, time, address, mode, wind

strength, filter, plasma, heater, additional function, lock operation, error and controller.

- ETC : Data on the external input port and devices connected to fire alarm and etc., indicating the

information on date, time, address, status and controller.

History period selection

Selection on present or past period, possibly checking the data on the desired history period.

As a default, Present period is selected.

- Present : If Present is selected, the history data is updated and displayed in real time whenever the

system status of air conditioner changes.

- Period selection : Check Period selection and click the button to select a specific date or period in the

past by the calendar and click Update button and the history of the selected period is shown.

History device selection

Basically, this function is used to save and show the history data of all devices, however, depending on

user’s selection, this can be used to show only the history of specific device.

- All devices : The data on all devices of the system when selecting all devices is shown.

- Specific devices : The data on specific device is shown. Let’s find out an example of the scenarios of

the specific device selection.