User manual

AC Manager

3-41

3. AC Manager Operation

Selecting schedule group and indoor unit

Schedule function can be set in such way that the same or unique operation can be made for each

schedule group. The group name and group number appears in the list for currently setting groups.

Among them, you can select the schedule group using mouse. If you want to edit(add/delete) the

schedule group, please refer to the group edit menu in the system setting.

Control setting window

You can set the operation mode, wind strength, wind direction, lock and desired temperature. for

operation during the scheduled operation of the air conditioner. The function of the control setting

button is the same as the function of air conditioner control setting button.

In addition, the schedule control setting of the schedule group can be controlled for each hour.

Special operation schedule information

In order to set daily operation schedule for the selected schedule group, drag the mouse and select the

desired hour. If you set many hours, drag and draw the desired hour vertically. This can be set by 10

minutes and the hour can be set by moving the scroll bar up and down. In the area corresponding to

the setting hour, the bitmap image that shows the selected modes by (2) control setting appears. If you

made wrong setting or want to modify it, drag the same hour you want to delete and then, it is deleted.

Schedule list

This can be used if you want to create/delete or select new weekly schedule.

Delete, copy and paste

If you want to delete the currently displayed schedule, you can use Delete button.

If you want to set the schedule by making the schedule hour or control setting information and etc., you don’t

have to repeatedly edit them and you can use Copy and Paste function. Firstly, select the schedule group and

check the schedule edit status and then, click Copy button. Then, select the schedule group you want to apply

and click Paste button. Thereafter, you can see the same schedule information has been set.

Change mode

If you want to change the control information like temperature, wind strength, lock and etc. while

maintaining the time among previously setting schedule information, you can use the schedule mode

change function. Depending on your selection of this function, the operation in weekly schedule

operation window varies.

Note : Delete

When executing Delete, previously saved schedule information is deleted.