User guide

10
Charger (AC Adapter)
y
Model : MCS-01ET
y
Manufacturer : TEN PAO INTERNATIONAL LTD.
y
Input : 100 - 240 V ~, 50 / 60 Hz
y
Output : 5 V
0
1.2 A
y
Handle with care during charging to prevent
electric shock.
y
Do not place near heating appliance.
y
Do not disassemble or deform.
y
Do not give shock on.
y
Avoid too high or low temperature or
humidity.
>
Caution
y
You can connect the device to PC using the
supplied USB cable, but charging time can
be longer.
y
The operating time on battery may vary
depending on the battery status, operational
status and environment conditions.
y
When the battery is discharged, printing is
available after charging it for more than 10
min. (Charge in full to print in a row.)
,
Note