User guide

14
Troubleshooting
Symptom Cause Correction
General
No power.
No sound.
The power cord is not plugged in.
Check whether electricity failed.
Check whether you select right function.
Plug in the power cord.
Check the condition by operating other electronic devices.
Press INPUT/FUNC. (F) and check the selected function.
CD
The unit does not start playback.
An unplayable disc is inserted.
The disc is dirty.
Insert a playable disc.
Clean the disc.
RADIO
Radio stations cannot be tuned in.
The signal strength of the radio station is too
weak.
Tune to the station manually.
iPod
iPod does not work.
Check whether the player is connected to
the unit correctly.
Check whether ipod is fully charged.
Connect it to the unit correctly.
Charge the iPod. iPod is automatically charged when
connected to the player.
Remote
control
The remote control does not
work properly.
The remote control is not pointed at the
remote sensor of the unit.
The remote control is too far from the unit.
There is an obstacle in the path of the remote
control and the unit.
The battery in the remote control is exhausted.
Point the remote control at the remote sensor of the unit.
Operate the remote control within about 16 ft (5 m).
Remove the obstacle.
Replace the battery with new one.