User guide

11
Setting the Clock
1. Turn the power on
2. Press for at least 2 seconds
3. Choose from either: AM 12:00 (for an am and pm
display) or 0:00 (for a 24 hour display).
4. Confirm your selection
5. Select the hours
6. Press
7. Select the minutes
8. Press
ON UNIT
11
/
]]
CLOCK
./>
SNOOZE/SET
./>
SNOOZE/SET
./>
SNOOZE/SET
Fall asleep while listening to your unit
Press SLEEP on the remote control repeatedly, the display changes in the
following order, SLP OFF - LIGHT - corresponding icons.
Press ./> repeatedly on SLP OFF, the display changes in the
following order, (Dimmer ON) t SLP 10 t ... t SLP 90 t SLP OFF
(Dimmer OFF)
(Dimmer : Dims the LED (Light-emitting diode) of front panel by half in
power-on status.)
Mood Lighting
Press SLEEP on the remote control repeatedly, the display changes in the
following order, SLP OFF - LIGHT - corresponding icons.
Press ./> repeatedly on LIGHT, the display changes in the following
order, L -- ON --> L -- OFF.
Using your unit as an alarm clock
1 press and hold ALARM 1,2 on the unit (or ALARM on the remote
control)
2 press SNOOZE/SET when the mode you want to be worken by is
showing, or press TUN-/+ after selecting the mode you want.
3 press SNOOZE/SET when the “ON” mode is showing, or
press TUN-/+ after selecting “ON”
4 press SNOOZE/SET when the function you want to be worken by is
showing, or press TUN-/+ after selecting the function you want.
5 “The TIME” will be displayed. then you can set the time you want the
alarm to go on. TUN-/+ to change the hours and minutes and
SNOOZE/SET to save.
6 press TUN-/+ after selecting the VOL you want, then
press SNOOZE/SET to save it to the unit.
7 If you want to select the ALARM -- 1 or ALARM -- 2 repeat the step 2-6
8 To the set or return to the function mode.
NOTE :
• If you don’t set clock, the alarm function doesn’t work.
• When any button is not pressed for longer than 5 minutes with the alarm
beeping, the alarm is automatically canceled.
SNOOZE
This function wakes you up every 5 minutes if you do not turn off the
alarm. When alarm is on and you press SNOOZE/SET, CD or USB is
changed into pause and mute. And tuner is on mute mode for 5 minutes
and then changed into play and mute off.
Press and hold SNOOZE/SET to change to stand by mode.