User guide

Operating12
Operating
2
Setting the Clock
1. Turn the unit o.
2. Press MEMORY/ CLOCK SET for at least 2
seconds.
3. Choose time mode by pressing
Y/U
.
- 12:00 (for an AM and PM display) or 0:00 (for a
24 hour display)
4. Press MEMORY/ CLOCK SET to conrm your
selection.
5. Select the hour and the minute by pressing
Y/U
.
6. Press MEMORY/ CLOCK SET.
7. Select the year, month and day by pressing
Y/U
.
Year
Month
Day
Year Day Month
8. Press MEMORY/ CLOCK SET.
9. If you want to reset the clock, repeat steps1-8.
10. If you want to stop while setting the clock, press
and hold MEMORY/ CLOCK SET.
y
If you want to set 12h, “PM” appears in the
display window.
y
If you want to set 24h, “PM” disappears in
the display window.
,
Note
Using your unit as an alarm
clock
1. Turn the unit on or o
2. Press and hold ALARM to set the alarm
function.
3. Choose alarm mode by pressing
Y/U
.
4. Press
T
to conrm your selection.
5. The hour setting blinks.
Press
Y/U
to change the hour and press
ALARM to save.
6. The minute setting blinks.
Press
Y/U
to change the minute and
press ALARM to save.
7. You can change in the following order, TUNER
-> BUZZER -> USB -> IPOD by using
Y/U
.
Press ALARM to save.
8. The alarm periods setting blinks.
Press
Y/U
to change the alarm periods,
and press ALARM to save.
alarm periods : 7Days -> 5Days -> 2Days
7Days : Everyday
5Days : Weekday
2Days : Weekend
9. The volume settings blinks.
Press
Y/U
to change the volume and
press ALARM to save.
10. The time when you want to stop ringing blinks.
Press
Y/U
to change the hour and
minute. Then press ALARM to save.
11. You can check the setting status.
12. If you want to reset the alarm, repeat steps 2-10.
When you set the alarm information(time,
sound source, alarm periods, volume), the
alarm icon “
” will blink in the display window.
,
Note
PD36D-DP-ADEULL_ENG-3873.indd 12 11. 09. 09 �� 7:04