Owners manual

59
Taking a 3D Photo
Open the Camera application.
Touch the 3D button on the
viewfinder.
Hold the phone horizontally, point
the lens towards the subject
which you want to photograph.
Touch the capture icon .
When the image is focused,the
focus indicators turns green and
the image will be captured.
Getting to know the viewfinder
(3D Video Camera)
a
b
c
d
e
a
Switch camera - You can move to
the internal camera from the external
one.
1
2
3
4
5
b
3D focus - You can manually fine-tune
3D focus by adjusting the amount of
overlapping with a bar that appears
at the bottom. Before starting to take
a 3D video, you can use this function.
You can't adjust this function while
recording.
c
Brightness - This defines and controls
the amount of light entering the video.
Slide the brightness indicator along the
bar towards “-” to decrease the video
brightness or “+” to increase it.
d
Flash - Allows you to turn on the flash
when capturing a video in dark place.
e
Settings - Touch this icon to open the
settings menu. See Using the advanced
settings.
3D focus mode - Select the auto
3D focus option from Border,
Center. Border uses a border
area for optimizing the amount of
overlapping. Center uses a center
area for it. You can also fine-tune
manually with 3D focus function
of viewfinder.
Stabilization - Set On to
compensate unsteady hand.