User manual

Operating Instructions
Owner's Manual 11
ENGLISH
A/CL
TURBO-Z
A/CL
TURBO-Z
(Heat Pump & Heater, Heat Pump Model)
1
10
9
15
11
13
12
14
6
4
3
5
2
8
7
1
10
9
11
13
12
14
6
4
3
5
2
8
7
(Cooling Model)
Name and Function-Remote Control
1. Signal Transmitter
• Transmits the signals to the Floor Standing Type air
conditioner
2. Operation Display of the Remote Control
3. Timer Set Button
• Each time the button is pressed, the mode is changed
in the following process.
Timer set (1, 2, 3, 4, 5, 6, 7 hours)
If you select “0:00” the off Timer function will be
canceled.
4.
Plasma Airfurifying Button
5. Auto Airflow Direction Control Button
• The holizontal louvers swing up and down.
6. Auto Airflow Direction Control Button
• The vertical louvers swings left and right.
7. Turbo-Z Cooling Operation Button
8. Indoor Fan Speed Selection Button
• To select the desired fan speed in 3 steps [Low, Mid,
High]
9. Cooling ON Button
10. Heating Button (Heat Pump & Heater, Heat Pump
Model)
Auto Operation Button (Cooling Model Only)
11. Soft Dry Operation Button
12. Energy Saving Operation Button(Cooling Model
Only)
13. Power ON/OFF Button
• Operation will start when this button is pressed, and
stop when the button is pressed again.
14. Temperature Setting Buttons
15. Electric Heater ON/OFF Button(Heat Pump &
Electric Heater Product Only)
Handling the remote control
• Aim at the signal receptor on the floor standing type air conditioner when operating.
• The remote control signal can be received at a distance of up to about 7meters.
• Be sure that there are no obstructions between the remote control and the signal receptor.
• Do not drop or throw the remote control.
• Do not place the remote control in a location exposed to direct sunlight, or next to a heating unit, or other heat
source.
Wireless Remote Control Puts all functions at your fingertips