Owners manual

8
5
How to Install the Bottom Wall Mount
How to Select the Installation Location of the Bottom Wall Mount
[unit : mm]
350
90
350
541
˚
Product
packaging box
Product packaging box
➊
➋
➍
➌
➊ Place the box on the bottom center of the attached top wall mount and place the box at a right angle
(90 degrees) to the top wall mount as shown in the figure.
➋ Find the V on the bottom of your box, and mark the point facing it on the wall [(a) in the figure].
➌ Rotate the box 90 degrees counterclockwise, making sure that (a) point in the figure is always at the
center.
Find the H on the left side of your box and mark the point facing it on the wall.
➍ Move the box to the right horizontally to bring the mark on the wall (a) level with the H on the box. Check
if the box is level, using a level.
Find the V on the right side of your box, and mark the point facing it on the wall.
→ Install the bottom wall fixing brackets at the points marked in step
➌
and
➍
.
How to Install the Bottom Wall Mount
Wall mount screw
Bottom wall attaching
brackets
Washer
➌
➍
→ Fix the two bottom wall mounting brackets onto the wall using the wall mount screw as shown in the
figure.
→ Depending on the condition of the wall, use additional washers when tightening the bottom wall attaching
brackets.