User guide

Getting Started6
Getting Started
1
Playable file
Requirement
MP3/ WMA music file
requirement
MP3/ WMA le compatibility with this unit is limited
as follows :
y
Sampling frequency : within 32 to 48 kHz (MP3),
within 32 to 48 kHz (WMA)
y
Bit rate : within 32 to 320 kbps (MP3),
40 to 192 kbps (WMA)
y
Maximum les : Under 999
y
Maximum folders : Under 99
y
File extensions : “.mp3”/ “.wma”
Compatible USB Devices
y
MP3 Player : Flash type MP3 player.
y
USB Flash Drive :
Devices that support USB1.1.
y
The USB function of this unit does not support all
USB devices.
USB device requirement
y
Devices which require additional program
installation when you have connected it to a
computer, are not supported.
y
Do not extract the USB device while in operation.
y
For a large capacity USB, it may take longer than a
few minutes to be searched.
y
To prevent data loss, back up all data.
y
If you use a USB extension cable or USB hub, the
USB device is not recognized.
y
Using NTFS le system is not supported. (Only
FAT(16/ 32) le system is supported.)
y
This unit is not supported when the total number
of les is 1 000 or more.
y
External HDD, Card readers, Locked devices, or
hard type USB devices, mobile phone are not
supported.
y
USB port of the unit cannot be connected to PC.
The unit cannot be used as a storage device.
y
Some USB may not work with this unit.
y
In power on state, you can’t charge a iPad via USB
port.
y
In power on state, you can charge a iPod/iPhone/
smart phone via USB port.
y
When you connect smart phone to USB port, you
can only charge it in power on state. (Some smart
phone may not be charged)