ENGLISH DEUTSCH FRANÇAIS ITALIANO SLOVENŠČINA NEDERLANDS OWNER’S MANUAL Wireless Speaker with Lightning Dock MUSIC IN STYLE Please read this manual carefully before operating your set and retain it for future reference. ND1530 ND1530-BS_ADEULLK_ENG.
1 2 Getting Started Getting Started Safety Information 1 CAUTION Getting Started RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Getting Started Disposal of your old appliance 2. All electrical and electronic products should be disposed of separately from the municipal waste stream via designated collection facilities appointed by the government or the local authorities. 3. The correct disposal of your old appliance will help prevent potential negative consequences for the environment and human health. 4.
1 Getting Started Getting Started LG Electronics hereby declares that this/these product(s) is/are in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC, 2004/108/EC, 2006/95/EC, 2009/125/EC and 2011/65/EU. Please contact to the following address for obtaining a copy of the DoC (Declaration of Conformity). Contact office for compliance of this product: LG Electronics Inc.
Table of Contents 5 Table of Contents 1 Getting Started 3 Troubleshooting 2 6 6 6 7 8 10 10 Safety Information Main Features Accessories Introduction Front Panel Rear Panel Connecting the AC Adapter How to Attach the Ferrite Core (For EMI Only) 17 Troubleshooting 4 Appendix 18 18 19 Trademarks and Licenses Handling the Unit Specifications 2 Operating 11 11 11 11 11 Basic Operations – Switch to Power On – Switch to Standby mode – iPhone/iPod Operations – Enjoying Music by Docking Your iPhone
1 Getting Started Main Features Introduction Made for iPhone/iPod Symbol Used in This Manual Getting Started Enjoys music from iPhone/iPod with simple connection. Portable In Listens to music from your portable device. ,,Note Indicates special notes and operating features. >>Caution Indicates cautions for preventing possible damages from abuse. Bluetooth® Enjoys music from Bluetooth device with simple connection. Accessories Please check and identify the supplied accessories.
Getting Started 7 Front Panel 1 Getting Started a iPhone/iPod Dock (Lightning Connector) b Support for iPhone/iPod c Indicator Displays each of functions. d Speaker e 1/F (Power/Function) - Power on : Press 1/F to turn the unit on when the power is turned off. -P ower off : Press and hold 1/F for about 3 seconds to turn the unit off - S elects the function and input source when the power is turned on. +/- (Volume) Adjusts volume of speaker. ND1530-BS_ADEULLK_ENG.
Getting Started Rear Panel 1 Getting Started a DOCK Press the PUSH OPEN button appears iPod DOCK. b (USB) Plays the audio files using your USB cable for iPhone/iPod ND1530-BS_ADEULLK_ENG.indd 8 c PORT.IN Listens to music from your portable device. d 12 V DC IN (AC adapter input) Connects the supplied AC adapter.
Getting Started 9 ,,Note How to open the dock station 1 Getting Started wvy{Upu XY}GkjGp u Notice: To open or close docking tray, please push center of “B PUSH OPEN”. >>Caution Precautions in using the touch buttons yy Use the touch buttons with clean and dry hands. - In a humid environment, wipe out any moisture on the touch buttons before using. yy Do not press the touch buttons hard to make it work. - If you apply too much strength, it can damage the sensor of the touch buttons.
Getting Started Connecting the AC Adapter 1 Plug the AC adapter into an AC outlet. How to Attach the Ferrite Core (For EMI Only) Getting Started You must affix the cores (supplied with the model you purchased) in order to reduce or eliminate electrical interference. 1. Pull the stopper [a] of the ferrite core to open. 2. Wind the portable cable and USB cable on the ferrite core. 3. Close the ferrite core until it clicks. >>Caution yy Only use the AC adapter supplied with this device.
2 Operating Operating Basic Operations Switch to Power On 11 2. Dock the iPhone/iPod (Lightning Connector) firmly. If you turn this unit on, your iPhone/iPod is automatically turned on and starts recharging . Press 1/F. The LED indicators light up and the last function you selected blinks, then the unit switches to Power on. 2 Switch to Standby mode Operating Press and hold 1/F. The LED indicators light on and then off, and the unit switches to Stand by.
Operating Enjoying Music by Connecting Your iPhone/iPod (30 Pin/Lightning Connector) to the Unit Compatible iPhone/iPod The unit supports the models as follows: iPhone 5, iPhone 4S, iPhone 4, iPhone 3GS iPod touch (3rd through 5th generation), iPod nano (4th through 7th generation) Depending on your iPhone/ iPod’s software version, you may not control your iPhone/iPod from the unit. 2 Operating iPhone, iPod nano, and iPod touch are trademarks of Apple Inc., registered in the U.S.
Operating 13 ,,Note yy An Error can occur as per below conditions. - Your iPhone/iPod is not connected firmly. - This unit recognizes your iPhone/iPod as an unknown device. - Your iPhone/iPod is exceptionally low in power. d The battery needs to be charged. d If you charge the battery while iPhone/ iPod is extremely low in power, it may take longer to be charged. 2 Operating yy Depending on your iPhone/iPod ’s software version, it may not be possible to control your iPhone/iPod from this unit.
Operating Listening to Music from Your Portable Device The unit can be used to play the music from many types of portable device. (Portable cable is not supplied as an accessory with this unit.) Auto Power Down This unit will be off itself to save electronic consumption in the case main unit is not connected to external device and is not used for 25 minutes. So does this unit after six hours since Main unit has been connected to other device using analog input. 2 Operating 1.
Operating Using a Bluetooth Wireless Technology About Bluetooth Bluetooth® is wireless communication technology for short range connection. The available range is within 10 meters. Bluetooth Profiles In order to use Bluetooth wireless technology, devices must be able to interpret certain profiles. This unit is compatible with following profile.
Operating ,,Note yy After searching for this unit on your Bluetooth device, connect the Bluetooth device to this unit. Then play music you want. yy The sound may be interrupted when the connection interfered by the other electronic wave. 2 yy You cannot control the Bluetooth device with this unit. Operating yy Pairing is limited one Bluetooth device per one unit and multi-pairing is not supported.
Troubleshooting 17 Troubleshooting Problem No Power. No sound. iPhone/iPod does not work. Correction yy Plug in the power cord. yy Check the condition by operating other electronic devices. yy Press 1/F and then check the selected function. yy Adjust volume of your portable device. Connect iPhone/iPod to the unit correctly. 3 Troubleshooting ND1530-BS_ADEULLK_ENG.
Appendix Trademarks and Licenses Handling the Unit When Shipping the Unit Bluetooth® wireless technology is a system which allows radio contact between electronic devices within a max. range of 10 meters. Connecting individual devices under Bluetooth® wireless technology does not incur any charges. A mobile phone with Bluetooth® wireless technology can be operated via the Cascade if the connection was made via Bluetooth® wireless technology.
Appendix 19 Specifications General AC adapter requirements DC 12 V 0 2 A, 100 -240 V, 50/ 60 Hz Power consumption 18 W Dimensions (W x H x D) 174 mm X 174 mm X 90.5 mm Net Weight (Approx.) 0.8 kg Operating temperature 5 °C to 35 °C (41 °F to 95 °F) Operating humidity 5 % to 90 % Inputs PORT. IN 500 mV (3.5 mm stereo jack) USB USB Version USB 2.0 Bus Power Supply USB : DC 5 V 01 A, DOCK : DC 5 V 0 1 A 4 Appendix Amplifier Output Power 5 W (8 Ω at 1 kHz) T.H.
ND1530-BS_ADEULLK_ENG.
