ENGLISH MODEL NCS400UR P/NO : MFL63284931 ITALIANO NEDERLANDS SLOVENIAN Please read this manual carefully before operating your set and retain for future reference.
Table of Contents 3 4 5 6 7 8-9 9-10 Safety Note Front Panel About detachable control panel Attaching the control panel Detaching the control panel Installation Basic installation Removing the existing receiver unit ISO-DIN installation Connection Basic operation Mute Using the EQ Using XDSS+ (Extreme Dynamic Sound System) Checking the clock Turning off the display light Resetting the unit Adjusting general settings Listening to a CD Pausing or restarting CD playback Searching for a section within a tra
Safety Note CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION : This product uses a Laser System. To ensure proper use of this product, please read this owner’s manual carefully and retain it for future reference. Should the unit require maintenance, contact an authorized service center. Performing controls, adjustments, or carrying out procedures other than those specified herein may result in hazardous radiation exposure. To prevent direct exposure to laser beam, do not try to open the enclosure.
Front Panel a [SRC] Selects function sources. [• OFF] Power on/ off. b [MENU] Activates setting menu. c Volume knob • Adjusts volume level. • Confirms the settings. • Checking tracks or files in CD mode or preset stations in TUNER mode. d [BAND] Selects a band. [• TA] Traffic Announcement (OPTIONAL) Searches stations that have TA/TP information. e Display window f [EQ]/[• XDSS+] Improves sound quality. g [DISP] • Press it, you can check the clock time.
About detachable control panel Attaching the control panel Detaching the control panel 1 Align the left side of the panel with the stopper. 1 Press the panel. 2 Push the right side or panel into the unit until it clicks. 2 Push the control panel to right. 3 4 Pull the control panel out of the unit. Put the detached control panel into the protective case. to open the control 2 1 Control panel Caution • The control buttons may not work properly if the control panel is not attached properly.
Installation ISO-DIN Installation Basic Installation 1 2 3 4 Remove the existing receiver unit. Make the necessary connections. Install the installation sleeve. Install the unit into the installation sleeve. Control panel If there is already an installation sleeve for the receiver unit in the dashboard, it must be removed. A 1 2 A AUTO-CD-/MP3-/WMA-Receiver 2 3 Remove the rear support from the unit. Remove the control panel and trim ring from the unit.
Connection Before connecting, make sure that the ignition switch is set to OFF, and remove the battery # terminal to avoid short circuits. Wired remote input(Black): Hard-wired control adapter can be connected.
Checking the clock Basic Operation ON PLAYER 1. Turn the unit on. Any key 2. Select a source. SRC 3. Adjust the volume. 4. Turn the unit off. Rotate the volume knob Press and hold OFF 1. Press DISP once to check the clock. 2. Press it again to remove it. Turning off the display light 1. Press and hold DISP. 2. Press and hold it again to turn it on. Note Under the light-off condition, press any keys, the light is turned on and then off automatically if you don’t press it within a few seconds.
For Light setting You can adjust the light effects by adjusting LED, DIM, or DIM L. DIM(Dimmer) OFF / ON / AUTO : You can change the brightness of the display window during the power-on status. When you set DIMMER to AUTO, the dimmer operates according to the car dimmer setting. DIM L (Dimmer Level): When you set DIM to ON/AUTO, you can adjust the dimmer level. (-2,-1,0,+1,+2) For Other setting AUX (Auxiliary) ON / OFF It is possible to use auxiliary equipment with this unit.
You have to set the disc format option to [Mastered] in order to make the discs compatible with the LG players when formatting rewritable discs. When setting the option to Live File System, you cannot use it on LG players. Playing back tracks/files in a way you want For using easy buttons 1. Press INT/ RPT/ SHF. 2. Press it again to cancel. (Mastered/Live File System : Disc format system for Windows Vista) Or Using the FUNC button 1. Press FUNC. 2. Rotate the volume knob to select an item and press it.
Adjusting TUNER settings Listening to the radio ON PLAYER SRC 1. Select a source to tuner. 2. Select a band. BAND 3. Auto seek. Manual seek. b?-/+?B Press and hold b?-/+?B Listening to the radio - more you can do Storing desired frequencies manually 1. Press BAND to select a desired band you want to store. 2. Press and hold b?- or +?B on the unit until the beep sound is heard. 3. Press it repeatedly to select a desired frequency. 4.
REG (Region) ON/ OFF (OPTIONAL) REG ON : The unit switches to another station, within the same network, broadcasting the same program when the receiving signals from the current station become weak. REG OFF : The unit switches to another station, within the same network when the receiving signals from the current station become weak. (This mode, the program may differ from the one currently received.
Troubleshooting Symptom General Power doesn’t turn on/ The unit doesn’t operate. Cause Leads and connectors are not properly. The fuse is blown. CD Radio Noise and other factors are causing the builtin microprocessor to operate incorrectly. No sound is heard / The vol- Cables are not connected correctly. ume level will not rise. There’s audio skipping. This unit is not firmly secured. The playback is not The disc is dirty. possible. The loaded disc is of a type this unit cannot play.
Specifications General Output Power Power Source Speaker impedance Ground System Dimensions (W x H x D) Net Weight Tuner FM Frequency Range S/N Ratio Distortion Usable Sensitivity AM (MW) Frequency Range S/N Ratio Distortion Usable Sensitivity CD Frequency Response S/N Ratio Distortion Channel Separation (1 kHz) AUX Frequency Response S/N Ratio Distortion Channel Separation (1 kHz) Max Input Level (1 kHz) USB Version Line OUT Frequency Response Output Voltage Subwoofer (optional) Frequency Response Output V
