User guide

36
1 Disable EWF in SuperSign Player Menu.
2 In Windows, select Start > Control Panel > Regional and Language Options.
3 Choose the language you want to use as shown below.
4 Re-install the SuperSign Player with the new language.
5 Enable EWF in the SuperSign Player Menu.
6 Reboot the system.
SuperSign Player
Language Options and Regional Settings
Language Options and Regional Settings
If you want to change the language, you can use Regional and Language Options of Microsoft Windows
Embedded Standard, the NC1000/NC2000's operating system.
To Change the Language:
Attention
● SuperSign Manager and SuperSign Player should use the same language.